メインコンテンツにスキップ

この分解は修理ガイドでは ありません。 お持ちのRubik's Cubeを修理する際は、iFixitの修理ガイドをご利用ください。

  1. Turn the top row so that each corner is roughly halfway between the sides Push the pieces up until they pop out of the cube, then, slide the rest out Repeat this process until you clear the level
    • Turn the top row so that each corner is roughly halfway between the sides

    • Push the pieces up until they pop out of the cube, then, slide the rest out

    • Repeat this process until you clear the level

  2. You should be able to just directly pull out the rest of the blocks, like so And there you have it!
    • You should be able to just directly pull out the rest of the blocks, like so

    • And there you have it!

    • You'll have the center piece, with the six centers of the six sides, the turning mechanism

  3. To reassemble, snap all the pieces back into place, and try not to rotate the faces. It helps to start with the middle pieces first
    • To reassemble, snap all the pieces back into place, and try not to rotate the faces.

    • It helps to start with the middle pieces first

    • Don't be afraid to use force!

    • Once you have the middle pieces in it's pretty simple to just push in the corner pieces

    • Again- don't be afraid to use force!

rab777hp

メンバー登録日: 2009年11月17日

20,831 ポイント

3のガイドは作成済み

チーム

OPEN OPEN人のメンバー

Community

76 メンバー

16のガイドは作成済み

I hated this thing. I disassembled mine with a .22 hollow point at 100 yards. Yes, It felt great!

mpias - 返信

lol don’t blame you, can’t stand the thing

Luke -

that method just broke my rubiks my cube.. thanks anyway

hamzamagdy888 - 返信

コメントを追加する

統計データを表示:

過去 24時間: 5

過去 7 日: 15

過去 30 日: 106

今までの合計 20,224