メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

The screws could be torx or Philips head in the body and where the neck bolts to the body.

この分解は修理ガイドでは ありません。 お持ちのRedOctane X-Plorerを修理する際は、iFixitの修理ガイドをご利用ください。

  1. Remove all 16 #10-torx screws from the back side of the case.
    • Remove all 16 #10-torx screws from the back side of the case.

    • Gently separate the case pieces.

    • A strong magnet helps greatly when taking out the screws.

    • Keep in mind when resembling, the case is plastic so, don't tighten the screws too tight.

  2. Unscrew the 4 #10-torx screws.
    • Unscrew the 4 #10-torx screws.

  3. Unscrew the 2 Philips head screws Peel off the pads. Push the colored keys out from the other side.
    • Unscrew the 2 Philips head screws

    • Peel off the pads.

    • Push the colored keys out from the other side.

  4. Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ

    Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ
  5. Unscrew the red screws and pull the board out. Then, unscrew the blue screws Pull the bracket things off.
    • Unscrew the red screws and pull the board out.

    • Then, unscrew the blue screws

    • Pull the bracket things off.

    • Pull out the pin.

  6. Unscrew the 4 Philips head screws.
    • Unscrew the 4 Philips head screws.

  7. Unscrew these 2 Philips head screws.
    • Unscrew these 2 Philips head screws.

  8. Push from the other side until it comes out. Take the spring off with the connector
    • Push from the other side until it comes out.

    • Take the spring off with the connector

  9. Unscrew the 4 Philips head screws. Peel off the contact pads.
    • Unscrew the 4 Philips head screws.

    • Peel off the contact pads.

thefluffyfist

メンバー登録日: 2017年04月08日

581 ポイント

2のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 3

過去 7 日: 8

過去 30 日: 32

今までの合計 988