メインコンテンツにスキップ

この分解で使用される工具

はじめに

Here's a Blackberry Pearl 8130 for disassembly. It had software issues which I afterward fixed.

この分解は修理ガイドでは ありません。 お持ちのBlackBerry Pearl 8130を修理する際は、iFixitの修理ガイドをご利用ください。

  1. RIM Blackberry Pearl 8130 Teardown, RIM Blackberry Pearl 8130 Teardown: 手順 1、 2の画像 1 RIM Blackberry Pearl 8130 Teardown, RIM Blackberry Pearl 8130 Teardown: 手順 1、 2の画像 2
    • Frontal/Back View- Dimensions: (LxWxD) 107mm x 50mm x 14mm (4.02" x 1.97" x .55") <- For those in America :) Weight: 96g or 3.10oz

    • Speaker

    • Status LED

    • High-res 240x260 Color LCD display

    • Red Trackball

    • 1.3MP Camera

    • Flash

    • Back Cover Latch

  2. RIM Blackberry Pearl 8130 Teardown: 手順 2、 2の画像 1 RIM Blackberry Pearl 8130 Teardown: 手順 2、 2の画像 2
    • Side View!

    • 3.5mm Stereo Headset Jack

    • USB 2.0 Data/Charging Port

    • Micro SD Card Slot

    • Camera/Quick Access Button

    • Volume Up/Down Button

    • Quick Access Button

    • Lanyard/Accessory Attachment

  3. RIM Blackberry Pearl 8130 Teardown: 手順 3、 2の画像 1 RIM Blackberry Pearl 8130 Teardown: 手順 3、 2の画像 2
    • Top/Bottom!

    • This phone his seen it's share of scratches!

    • Mute/Ringer Off Button

    • Microphone

  4. RIM Blackberry Pearl 8130 Teardown: 手順 4、 3の画像 1 RIM Blackberry Pearl 8130 Teardown: 手順 4、 3の画像 2 RIM Blackberry Pearl 8130 Teardown: 手順 4、 3の画像 3
    • Press down on clip and remove back cover.

    • Push Battery from top to bottom and pull up to remove.

    • Battery: Standby time- 216 hours/Call time- 4 hours

    • Clip

    • Back cover

  5. RIM Blackberry Pearl 8130 Teardown: 手順 5、 2の画像 1 RIM Blackberry Pearl 8130 Teardown: 手順 5、 2の画像 2
    • 1.3MP Camera

    • Flash

    • QuALCOMM 3G CDMA

    • Phone information sticker

    • Torx T5 screws

  6. RIM Blackberry Pearl 8130 Teardown: 手順 6、 3の画像 1 RIM Blackberry Pearl 8130 Teardown: 手順 6、 3の画像 2 RIM Blackberry Pearl 8130 Teardown: 手順 6、 3の画像 3
    • Insert curved point metal spudger into gap between keyboard and bottom bezel cap.

    • Bottom Bezel Cap

    • Pull up and push away to lift bezel.

    • Hold this cap with your thumb and flip the phone around.

    • Insert spudger under bezel and lift on both sides.

    • Pry Here

    • The Bezel Cap should pop off at this point revealing two more T5 screws!

    • Two T5 Screws

  7. RIM Blackberry Pearl 8130 Teardown: 手順 7、 3の画像 1 RIM Blackberry Pearl 8130 Teardown: 手順 7、 3の画像 2 RIM Blackberry Pearl 8130 Teardown: 手順 7、 3の画像 3
    • Remove the two T5 Screws and set them aside.

    • The two T5 screws and their respective holes

    • Start at the top of one of the sides of the phone and pry off the silver sides with a spudger or your fingers.

    • Once you have removed both sides set them aside

    • The silver sides

    • Various holes, buttons and slots

  8. RIM Blackberry Pearl 8130 Teardown: 手順 8、 3の画像 1 RIM Blackberry Pearl 8130 Teardown: 手順 8、 3の画像 2 RIM Blackberry Pearl 8130 Teardown: 手順 8、 3の画像 3
    • Headphone Jack

    • USB 2.0 Port

    • Micro SD Card Slot

    • Camera Button

    • Up and Down Buttons

    • Quick Access Button

  9. RIM Blackberry Pearl 8130 Teardown: 手順 9、 1の画像 1
    • Pry front cover and back cover off of LCD and circuit board.

    • Separate the three parts and set them down.

    • Back plastic assembly

    • LCD and Logic Board

    • Front plastic assembly and keypad+trackball

  10. RIM Blackberry Pearl 8130 Teardown: 手順 10、 3の画像 1 RIM Blackberry Pearl 8130 Teardown: 手順 10、 3の画像 2 RIM Blackberry Pearl 8130 Teardown: 手順 10、 3の画像 3
    • Trackball (Removable). Pop it out from the back.

    • Display Glass (Removable). Pry from the top to break glue seal, pry the rest of with your fingers.

    • Keypad

    • LCD and connector above it to the left (Removable). Remove connector with spudger and free LCD from clips.

    • Keypad connector (Keypad was removed). To remove pry connector up off of logic board.

    • Battery Connector

    • Various chips under metal heat sinks. Sorry I won't remove them the phone is still good and I don't want to risk damaging it :(

  11. RIM Blackberry Pearl 8130 Teardown: 手順 11、 3の画像 1 RIM Blackberry Pearl 8130 Teardown: 手順 11、 3の画像 2 RIM Blackberry Pearl 8130 Teardown: 手順 11、 3の画像 3
    • Speaker (Removable by Soldering)

    • Keyboard Connector

    • Trackball (Remove by poking out)

    • 1.3MP Camera (Removable by Soldering)

    • From left to right: Headphone jack, Antenna?, USB Port, Micro SD Card Slot. All of the above are removable by soldering.

    • Battery Connector (Removable by pulling it straight out of it's slot)

    • Various chips covered by heatsinks

  12. RIM Blackberry Pearl 8130 Teardown: 手順 12、 1の画像 1
    • Here it is, everything all laid out.

    • Back Cover and Battery

    • T5 Screws

    • Bezel cap

    • Shiny Side pieces

    • Front Plastic Assembly

    • Back Plastic Assembly

    • LCD and Logic Board

Liam Speirs

メンバー登録日: 2009年11月08日

363 ポイント

2のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 6

今までの合計 13,946