メニュー

あなたの設定

私のワークベンチ

お持ちのデバイス用の修理ガイド、交換用パーツやアンサーフォーラムにアクセスする。
カート

カートには何も入っていません。

当社のショップを閲覧する

Nokia 6108 Teardown

作成者： Honam1021 (そして 3 人のその他投稿者)
公開日: March 4, 2011
  • コメント: 1
  • お気に入り: 1
  • 閲覧数： 4.3k

分解

この分解で使用される工具

これらのツールを購入する

はじめに

I'm going to open my old Nokia phone to have a look.But I only have very limited English writing skills and I hope you'll understand what I'm talking about.

この分解は修理ガイドでは ありません。 お持ちのNokia 6108を修理する際は、iFixitの修理ガイドをご利用ください。

  1. Hello,I'm going to open my phone for some fun.

    • Hello,I'm going to open my phone for some fun.

    • Be careful not to drop any screws or parts when you're opening your phone.This may render your phone not usuable.Open your phone at your own risk.

    編集

  2. Remove the following parts. Battery cover

    • Remove the following parts.

    • Battery cover

    • Battery

    • SIM card

    • Remove two trox screws marked in figure 2.

    編集

  3. Remove the front panel by pulling it or using an I don't have a opening tool.So I used a flathead screw driver instead.

    • Remove the front panel by pulling it or using an

    • I don't have a opening tool.So I used a flathead screw driver instead.

    • Be careful not the damage the number pad connector(highlighted in red).If you break it.You'll have to replace the entre front panel.

    編集

  4. MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

    MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

  5. Remove 5 trox screws that are holding the screen and the touch pad. Remove 5 trox screws that are holding the screen and the touch pad.

    • Remove 5 trox screws that are holding the screen and the touch pad.

    編集

  6. After removing the touch pad and the screen.You can remove the logic board from the case. The board seem don't want to leave its cozy home.

    • After removing the touch pad and the screen.You can remove the logic board from the case.

    • The board seem don't want to leave its cozy home.

    編集

  7. Let's start removing the parts under the logic board.

    • Let's start removing the parts under the logic board.

    • Parts need to be removed.

    • A motor

    • Charger connector

    • A speaker

    編集

  8. Removing the EMI shield.Pry around the edge of the shield to remove it.

    • Removing the EMI shield.Pry around the edge of the shield to remove it.

    編集

  9. Nothing under the EMI shield. I think we should stop here right now.There are pictures for all parts.

    • Nothing under the EMI shield.

    • I think we should stop here right now.There are pictures for all parts.

    編集

作成者

3他の投稿者と一緒に

Honam1021

メンバー登録日: 2011年02月19日

322 ポイント

1ガイドが承認済み

バッジ: 9

+6 個以上のバッジ

コメント1件

コメントを追加

i have same phone but it's keypad button's are not working.... can u help me that

Rohit Yadav - 返信

コメントを追加する

1024

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 8

今までの合計 4,358