メインコンテンツにスキップ

この分解は進行中です。 – 最新版を見るには定期的に再読み込みします。

必要な工具と部品

  1. MacBook Pro 15" Retina Display Mid 2015 Teardown, Lower Case: 手順 1、 1の画像 1
    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

    • Eight 3.1 mm

    • Two 2.3 mm

  2. MacBook Pro 15" Retina Display Mid 2015 Teardown: 手順 2、 2の画像 1 MacBook Pro 15" Retina Display Mid 2015 Teardown: 手順 2、 2の画像 2
    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

  3. MacBook Pro 15" Retina Display Mid 2015 Teardown: 手順 3、 3の画像 1 MacBook Pro 15" Retina Display Mid 2015 Teardown: 手順 3、 3の画像 2 MacBook Pro 15" Retina Display Mid 2015 Teardown: 手順 3、 3の画像 3
    • The lower case has two plastic pegs (red) that fit into plastic clips in the upper case (orange).

    • During reassembly, gently push down the center of the lower case to reattach the case to its two plastic clips.

  4. MacBook Pro 15" Retina Display Mid 2015 Teardown, Battery Connector: 手順 4、 1の画像 1
    • Peel back the sticker covering the battery connector.

  5. MacBook Pro 15" Retina Display Mid 2015 Teardown: 手順 5、 3の画像 1 MacBook Pro 15" Retina Display Mid 2015 Teardown: 手順 5、 3の画像 2 MacBook Pro 15" Retina Display Mid 2015 Teardown: 手順 5、 3の画像 3
    • Gently lift each side of the battery connector to pry the connector out of its socket on the logic board.

    • Bend the connector back toward the battery, ensuring that the battery connector doesn't accidentally make contact with the logic board.

  6. MacBook Pro 15" Retina Display Mid 2015 Teardown, SSD: 手順 6、 1の画像 1
    • Remove the single 2.9 mm T5 Torx screw securing the SSD to the logic board.

  7. MacBook Pro 15" Retina Display Mid 2015 Teardown: 手順 7、 3の画像 1 MacBook Pro 15" Retina Display Mid 2015 Teardown: 手順 7、 3の画像 2 MacBook Pro 15" Retina Display Mid 2015 Teardown: 手順 7、 3の画像 3
    • Lift the end of the SSD up enough to pass over the speaker directly behind it.

    • Do not lift the SSD too high, or you could damage the contacts or socket.

    • Pull the SSD straight out of its socket on the logic board.

作成者

1人の作成者と共同作成されました。

Terry Salt

メンバー登録日: 02/10/20

69 ポイント

1ガイドが承認済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 5

過去 7 日: 51

過去 30 日: 236

今までの合計 7,824