分解
This is a teardown of the Leap Motion Controller.
この分解は修理ガイドでは ありません。 お持ちのLeap Motion Controllerを修理する際は、iFixitの修理ガイドをご利用ください。
First, unplug the Leap Motion device.
Peel off the rubber backing and unscrew the housing from the internal components.
Peel back the tape on the internal components and lift the lenses out.
Handle the lens array in a clean environment
Put it back together!
Enjoy!
2人の作成者と共同で作成されました。
メンバー登録日: 05/05/13
190 ポイント
1ガイドが承認済み
バッジ: 0
can you post high-res pictures of each circuit board's side?
Ben Iofel - 2013年11月21日 返信
サイズを選択し、以下のコードをコピーして、このガイドを小さなウィジェットとしてサイト/フォーラムに埋め込みます。
過去 24時間: 0
過去 7 日: 6
過去 30 日: 13
今までの合計 9,812