メインコンテンツにスキップ

この分解で使用される工具

はじめに

This guide explains how to take apart the KAMBROOK 1.7L BPA Free Kettle , so you can take those part off by yourself.

この分解は修理ガイドでは ありません。 お持ちのKAMBROOK 1.7L BPA Free Kettleを修理する際は、iFixitの修理ガイドをご利用ください。

  1. Put the device on the table.
    • Put the device on the table.

    • CAUTION: Make sure the cord is not plugged into the outlet in order to prevent electrocution.

    • CAUTION: Make sure there is no water inside the kettle.

  2. Take off the handle cover and the button on it.
    • Take off the handle cover and the button on it.

  3. Turn the device upside down and screw down the screws.
    • Turn the device upside down and screw down the screws.

  4. Take the bottom cover off .
    • Take the bottom cover off .

  5. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  6. Pry down the fixed black circle with a screwdriver
    • Pry down the fixed black circle with a screwdriver

    • Caution: Be careful of the tension.

  7. Pry a slit between the kettle body and metal guy with hammer and screwdriver slowly.
    • Pry a slit between the kettle body and metal guy with hammer and screwdriver slowly.

    • Cut the rubber band in two halves and take them off.

    • Finally, take the metal guy off.

  8. Turn the device back to the upside.
    • Turn the device back to the upside.

    • Use a screwdriver to open the top cover.

  9. After you open the top cover, screw down 2 screws at the bottom of it, then you can get the whole cover off easily. Caution: there have some components inside.  DO NOT LOSE THEM! Caution: there have some components inside.  DO NOT LOSE THEM!
    • After you open the top cover, screw down 2 screws at the bottom of it, then you can get the whole cover off easily.

    • Caution: there have some components inside. DO NOT LOSE THEM!

  10. Now focus on the charging base part.
    • Now focus on the charging base part.

    • Put that on the table.

  11. screw down three screws off in the middle.
    • screw down three screws off in the middle.

  12. Remove 3 white rubber mat with tweezers.
    • Remove 3 white rubber mat with tweezers.

    • Screw down three screws off below rubber mats.

    • The kettle is now fully disassembled.

  13. The kettle is now fully disassembled.
    • The kettle is now fully disassembled.

Teardown Group 4

メンバー登録日: 2018年10月15日

205 ポイント

1ガイドが承認済み

コメント1件

why? …………………………

Tatertot - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 6

今までの合計 149