メインコンテンツにスキップ

はじめに

Today we will be tearing down the JBL Clip 1 and looking at its components

この分解は修理ガイドでは ありません。 お持ちのJBL Clip 1を修理する際は、iFixitの修理ガイドをご利用ください。

  1. Starting with the main side of the speaker, turn it over so that the back side is visible. Starting with the main side of the speaker, turn it over so that the back side is visible.
    • Starting with the main side of the speaker, turn it over so that the back side is visible.

  2. Pull off the rubber ring on the underside of the speaker so that the screws are visible. Unscrew the small phillips screws.
    • Pull off the rubber ring on the underside of the speaker so that the screws are visible.

    • Unscrew the small phillips screws.

  3. Firmly pull the back cover off of the device.
    • Firmly pull the back cover off of the device.

    • Begin to unscrew the screws holding the front of the speaker in place.

  4. After unscrewing the 3 screws on the inside turn the speaker over so that the front is placing you. Using a prying tool, pull up on the rim of the speaker front. Using a prying tool, pull up on the rim of the speaker front.
    • After unscrewing the 3 screws on the inside turn the speaker over so that the front is placing you.

    • Using a prying tool, pull up on the rim of the speaker front.

  5. Pull up to reveal the other side of the speaker chip and the speaker component itself. Be careful of the wire connecting the speaker to the board as too much pressure may cause it to snap.
    • Pull up to reveal the other side of the speaker chip and the speaker component itself.

    • Be careful of the wire connecting the speaker to the board as too much pressure may cause it to snap.

  6. Unscrew the speaker connecting to the front piece of plastic. Pull the speaker off of the front piece.
    • Unscrew the speaker connecting to the front piece of plastic.

    • Pull the speaker off of the front piece.

  7. Teardown is fully finished. There are only 5 main seperate components to the speaker! Teardown is fully finished. There are only 5 main seperate components to the speaker! Teardown is fully finished. There are only 5 main seperate components to the speaker!
    • Teardown is fully finished. There are only 5 main seperate components to the speaker!

Timothy McEvoy

メンバー登録日: 2018年01月21日

984 ポイント

2のガイドは作成済み

チーム

Master Techs Master Techs人のメンバー

Community

306 メンバー

1,057のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 9

過去 30 日: 43

今までの合計 3,482