はじめに

First of all: my apologies for my english, my native language is Dutch.

So i hope you'll understand my written guide ;)

Have fun!

この分解は修理ガイドでは ありません。 お持ちのHP G61を修理する際は、iFixitの修理ガイドをご利用ください。

  1. Turn the device over and remove the screws from the battery. Remove the black panels holding the HDD, ram, and wifi.
    • Turn the device over and remove the screws from the battery. Remove the black panels holding the HDD, ram, and wifi.

    コメントを追加する

  2. Remove the RAM modules and the HDD as shown in the pictures.
    • Remove the RAM modules and the HDD as shown in the pictures.

    コメントを追加する

    • Locate the screw for the DVD player and remove it. Then remove the DVD player with a thin spudger.

    コメントを追加する

    • Remove the screws to remove the keyboard.

    コメントを追加する

    • Remove the screws that are circled in the picture. These screws hold the case of the laptop.

    コメントを追加する

    • Remove the WIFI antenna cables from WIFI card.

    • Then remove the screws of the WIFI card and remove the card.

    コメントを追加する

    • Flip the laptop around and gently remove the keyboard with your fingers.

    • Start with the corners of the keyboard.

    • Gently loosen the keyboard with a flat head screwdriver or a thin spudger.

    コメントを追加する

    • After removing the keyboard, find the other screws located in the grey panel.

    • Remove the black plastic. Be careful with the white flat cable.

    コメントを追加する

    • Remove the black flat wire of the LCD screen from the motherboard.

    コメントを追加する

    • Remove the hinge screws with the screwdriver from the left side to the right side.

    • Under one of the two hinges, there is a hidden screw (case)

    コメントを追加する

    • Remove the black plastic.

    • Remove the audio boxes.

    • Remove all the other wires and cables.

    • Then gently separate the screen from the case.

    コメントを追加する

    • Use an iOpener to separate the grey case from the bottom case.

    • Careful: the battery compartment is together with the grey panel.

    • Tip: "slide" the iOpener while opening until you hear clicks. It is easy if you slide.

    コメントを追加する

    • Remove the motherboard by removing the screws first. Be careful with the cables and the wires.

    • Be careful with the connector of the DC power jack. You can replace the USB drivers on that side as well.

    コメントを追加する

    • Remove the cooler.

    コメントを追加する

    • To remove the Processor, unlock the processor socket with a flat screwdriver.

    • Then gently remove the Processor.

    コメントを追加する

Kevin D

メンバー登録日: 2014年05月02日

5,654 ポイント

21のガイドは作成済み

コメント1件

Thanks a bunch this helped a whole lot!!!!

Teresa halley - 返信

コメントを追加する

統計データを表示:

過去 24時間: 4

過去 7 日: 9

過去 30 日: 42

今までの合計 6,490