GEN 2 Wheelchair Teardown

作成者： Jennifer (そして 15 人のその他投稿者)

公開日: June 6, 2013

コメント: 1
お気に入り: 6
閲覧数： 2.3千

GEN 2 Wheelchair Teardown

作成者： Jennifer (そして 15 人のその他投稿者)

公開日: June 6, 2013

コメント: 1
お気に入り: 6
閲覧数： 2.3千

分解

はじめに

Free Wheelchair Mission’s most recent model, the GEN 2, was created for use in developing countries. This new model is designed to fit any body type for adults and children with special needs.

The GEN 2 has several updated features for increased safety and maneuverability including: adjustable seating, large caster wheels, extra-thick seat cushion, and adjustable footrests.

In this guide, you will learn how to teardown the GEN 2 wheelchair for storage or transportation.

必要な工具と部品

この分解は修理ガイドでは ありません。お持ちのGEN 2 Wheelchairを修理する際は、iFixitの修理ガイドをご利用ください。

手順1 GEN 2 Wheelchair Teardown

GEN 2 Wheelchair Teardown, GEN 2 Wheelchair Teardown: 手順 1、 3の画像 1

GEN 2 Wheelchair Teardown, GEN 2 Wheelchair Teardown: 手順 1、 3の画像 2

GEN 2 Wheelchair Teardown, GEN 2 Wheelchair Teardown: 手順 1、 3の画像 3

Find a clean area to work in so every part can be accounted for.

編集

手順2

Remove the footrest by unscrewing the lower bolt, using the 10 mm wrench.
Remove the upper bolt above the socket.
Slide out the footrest and unscrew the plate welded to the socket.
Slide the plate upward and off of the track to remove.
Untie the foot retention belt.

編集

手順3

Undo the seatbelt.
Remove the seat cushion by pulling it off of the velcro.
Remove the back padding by untieing the straps attached to the back pad.

編集

手順4

Turn the wheelchair upside down and untie the plastic seat.
Remove the plastic seat support.

編集

手順5

Locate the plastic cap on top of the caster wheels.
Place the 10mm wrench underneath the plastic cap and lift it up to remove.

編集

手順6

Remove the caster wheels by unscrewing the bolt under the cap with a 19 mm wrench.
Lift the wheelchair up to pull the caster wheels off.
Use caution: The metal sheath and the bearing of the caster wheel is not attached and may fall off upon removal.

編集

手順7

Use a 1/2 inch socket wrench to unscrew bolts to remove the brakes.
Pull the brakes off.

編集

手順8

Remove the wheels by placing a 19 mm socket wrench on the inside of the wheel and unscrew the bolt.
Unscrew the bolt on the outside of the wheel by using a 19 mm socket wrench.

編集

手順9

Unscrew all of the 10mm bolts on the frame using the 10 mm wrench (15 bolts total).
Separate the handle frame pieces from the metal side structure (2 bolts total).
Remove the bolts attaching the three support beams (4 bolts each, 12 bolts total).