メインコンテンツにスキップ

この分解は進行中です。 – 最新版を見るには定期的に再読み込みします。

必要な工具と部品

  1. Flip Ultra HD Teardown, Flip Ultra HD Teardown: 手順 1、 2の画像 1 Flip Ultra HD Teardown, Flip Ultra HD Teardown: 手順 1、 2の画像 2
    • Front and back of the Flip Ultra HD

  2. Flip Ultra HD Teardown: 手順 2、 2の画像 1 Flip Ultra HD Teardown: 手順 2、 2の画像 2
    • Locate the lock/unlock latch at the bottom of The Flip Ultra HD 2nd Generation and slide it into the unlock position.

  3. Flip Ultra HD Teardown: 手順 3、 1の画像 1
    • Pull down on the large front cover to to expose the battery slots.

  4. Flip Ultra HD Teardown: 手順 4、 3の画像 1 Flip Ultra HD Teardown: 手順 4、 3の画像 2 Flip Ultra HD Teardown: 手順 4、 3の画像 3
    • Pry off the top of the camcorder with a flat head screwdriver. The cover is glued on with adhesive so it will take some force to dislodge it from the device.

  5. Flip Ultra HD Teardown: 手順 5、 3の画像 1 Flip Ultra HD Teardown: 手順 5、 3の画像 2 Flip Ultra HD Teardown: 手順 5、 3の画像 3
    • Use a small Phillips head screwdriver to remove the two screws at the bottom of the battery slot and the two screws above the camera lens.

  6. Flip Ultra HD Teardown: 手順 6、 2の画像 1 Flip Ultra HD Teardown: 手順 6、 2の画像 2
    • Gently pull off back cover of the camcorder. Once again, it is glued with adhesive

  7. Flip Ultra HD Teardown: 手順 7、 2の画像 1 Flip Ultra HD Teardown: 手順 7、 2の画像 2
    • Remove the ribbon cable gently and pull the back cover off

  8. Flip Ultra HD Teardown: 手順 8、 3の画像 1 Flip Ultra HD Teardown: 手順 8、 3の画像 2 Flip Ultra HD Teardown: 手順 8、 3の画像 3
    • Remove all of the screws on the circuit board

    • Make sure to remove the screw behind the display

  9. Flip Ultra HD Teardown: 手順 9、 2の画像 1 Flip Ultra HD Teardown: 手順 9、 2の画像 2
    • There are two wires with white heads connecting the circuit board to the front of the device. Gently pull them from their slots to detach the front casing from the circuit board.

  10. Flip Ultra HD Teardown: 手順 10、 1の画像 1
    • The disassembled Flip Ultra HD

作成者

2人の作成者と共同で作成されました。

Charlie Tran

メンバー登録日: 10/29/11

155 ポイント

1ガイドが承認済み

コメント 1 件

Where can I buy the usb cable that goes to the flip board?

I botched mine in an attempt to resolder the usb connector back.

mein kampf - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 9

今までの合計 5,192