メインコンテンツにスキップ

必要な工具と部品

この分解は修理ガイドでは ありません。 お持ちのFitbit Charge HRを修理する際は、iFixitの修理ガイドをご利用ください。

  1. Fitbit Charge HR Teardown, Remove Screws: 手順 1、 1の画像 1
    • Take the 4 Screws out of the Sides you will need a T3 star Screw Driver

  2. Fitbit Charge HR Teardown: 手順 2、 2の画像 1 Fitbit Charge HR Teardown: 手順 2、 2の画像 2
    • You Pry out the Main board you can see the Metal Hooks

  3. Fitbit Charge HR Teardown: 手順 3、 1の画像 1
    • You can Then pull out the Screws from around the Screen

作成者

1人の作成者と共同作成されました。

Bradley Nelson

メンバー登録日: 03/08/16

56 ポイント

1ガイドが承認済み

8 件のコメント

Can the battery be replaced?

Rick - 返信

Mine was just over a year old (barely out of warranty) when it died. The Fitbit folks were kind enough to replace it anyway once I expressed my displeasure. I'd haggle with them a bit before going the DIY route but I'm definitely keeping my old one for spare parts. Hopefully someone will point out an aftermarket battery source before I need to do that.

fragmasterflash - 返信

The screws in mine were Torx T-2, not T-3.

Jake McIvor - 返信

The button is stuck in my ChargeHR. I bought the T3 screwdriver and it is too big. Either the screws are T2 or my screwdriver is too much imprecise.

Anyone fixed a stuck button?

Anderson Maciel - 返信

it definitely not T3 must be T2

Marc Frederick - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 6

過去 30 日: 20

今までの合計 23,974