メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

ビデオの概要

はじめに

As a facial-recognition technology initially launched on iPhone X, Face ID has been applied to latest iPhones, including iPhone XS,XS Max and XR. With this amazing Face ID system, users can unlock their devices by scanning and confirming facial identity. Whether you are wearing a hat, putting on glasses or you are in the dark.

この分解は修理ガイドでは ありません。 お持ちのiPhone Xを修理する際は、iFixitの修理ガイドをご利用ください。

  1. There are 8 components packed into the front of the phone. Infrared Camera; Flood Illuminator; Proximity Sensor; Ambient Light Sensor; Speaker; Microphone; Front Camera; Dot Projector;
    • There are 8 components packed into the front of the phone. Infrared Camera; Flood Illuminator; Proximity Sensor; Ambient Light Sensor; Speaker; Microphone; Front Camera; Dot Projector;

    • The infrared camera, the dot projector and the front camera are located on the back glass assembly.

    • The flood illuminator, the proximity sensor, the ambient light sensor, the speaker and the microphone are located on the display assembly.

    • Please be careful when disassembling or repairing the phone. Damage of any component will cause Face ID failure.

    • Please be noted that there is a slot on the display assembly. When assembling the phone, the fold of the speaker flex cable should be placed correspondingly in the slot to prevent the cable from getting broken. Which will also result in the failure of Face ID.

  2. We can see that there are many holes on the flood illuminator that are arranged in a matrix of 11×11.
    • We can see that there are many holes on the flood illuminator that are arranged in a matrix of 11×11.

  3. Chip 1 is an unencrypted chip.
    • Chip 1 is an unencrypted chip.

    • Chip 2 is the flood illuminator. Chip 3 and Chip 4 are proximity sensors that are responsible for receiving and transmitting respectively.

    • Independent of each other, the three chips are indispensable.

  4. The outer layer of the dot projector is sealed with resin and protected by metal welding techniques.
    • The outer layer of the dot projector is sealed with resin and protected by metal welding techniques.

    • Once the dot projector has been detached, we can see a crystal that looks just like a diamond lens.

  5. The chip on the left is used to store data, whereas the chip on the right side acts just like a projector.
    • The chip on the left is used to store data, whereas the chip on the right side acts just like a projector.

    • And please be noted that the chip is exposed without black adhesive seal. So it can be easily damaged once water-damaged or dropped. What’s more, it also can not be restored once damaged.

  6. We can see that there is a concave lens and a convex lens on the crystal. And the two are made of glass. Once dropped, Face ID can also be affected.
    • We can see that there is a concave lens and a convex lens on the crystal. And the two are made of glass. Once dropped, Face ID can also be affected.

  7. Judging by what we have learned during the disassembling, main circuits of the Face ID are exposed. Once water damaged or exposed to a relatively humid environment, there might be electricity leakage or short-circuit problem that can result in Face ID failure.
    • Judging by what we have learned during the disassembling, main circuits of the Face ID are exposed. Once water damaged or exposed to a relatively humid environment, there might be electricity leakage or short-circuit problem that can result in Face ID failure.

    • What’s more, most of the Face ID parts are made of glass. Once dropped, Face ID is most likely to be unavailable.

    • In summary, Face ID can be easily damaged and hard to be restored. Therefore, please be very careful in daily use. Make sure the phone is protected from water-damage or heavy falling.

    • Repair technicians must exercise caution when repairing the logic board or replacing the display assembly.

    • For detailed operation, you can check out the video here.

    • Credit: REWA Technology

Phryne

メンバー登録日: 2019年11月17日

1,686 ポイント

15のガイドは作成済み

2 件のコメント

Brilliant! keep up with your good work.

HAKU_LYU - 返信

Thanks for your support!

Phryne -

コメントを追加

統計データを表示:

過去 24時間: 17

過去 7 日: 90

過去 30 日: 428

今までの合計 1,272