はじめに

This information will give you the understanding of how and what makes an ear bud work.

この分解は修理ガイドでは ありません。 お持ちのIn-Ear Headphoneを修理する際は、iFixitの修理ガイドをご利用ください。

As you can see this is your average ear bud, from these two pictures you can see the front and the back. As you can see this is your average ear bud, from these two pictures you can see the front and the back.
  • As you can see this is your average ear bud, from these two pictures you can see the front and the back.

コメントを追加する

Take the silver covering off of the ear bud, notice the black wire connecting the two (the wire should be knotted) Take the silver covering off of the ear bud, notice the black wire connecting the two (the wire should be knotted) Take the silver covering off of the ear bud, notice the black wire connecting the two (the wire should be knotted)
  • Take the silver covering off of the ear bud, notice the black wire connecting the two (the wire should be knotted)

コメントを追加する

Now detach the black shell completely. Now detach the black shell completely.
  • Now detach the black shell completely.

コメントを追加する

Remove the black wire from the ear bud. Take the copper colored wire out of the black covering Remove the black wire from the ear bud. Take the copper colored wire out of the black covering
  • Remove the black wire from the ear bud. Take the copper colored wire out of the black covering

コメントを追加する

This is what is inside the ear bud. You will see a silver ring surrounding the wires, and protecting cellophane around it.
  • This is what is inside the ear bud. You will see a silver ring surrounding the wires, and protecting cellophane around it.

コメントを追加する

On the ear bud you will see a magnet on the inside of the black encasing, Remove the Magnet from the encasing. On the ear bud you will see a magnet on the inside of the black encasing, Remove the Magnet from the encasing. On the ear bud you will see a magnet on the inside of the black encasing, Remove the Magnet from the encasing.
  • On the ear bud you will see a magnet on the inside of the black encasing, Remove the Magnet from the encasing.

コメントを追加する

This is the copper band that was suronding the magnet. This is the copper band that was suronding the magnet.
  • This is the copper band that was suronding the magnet.

コメントを追加する

This is the black ring that was around the magnet. This is the black ring that was around the magnet.
  • This is the black ring that was around the magnet.

コメントを追加する

Take the ear bud, with the cellophane like wraping and remove the silver chip Take the ear bud, with the cellophane like wraping and remove the silver chip Take the ear bud, with the cellophane like wraping and remove the silver chip
  • Take the ear bud, with the cellophane like wraping and remove the silver chip

コメントを追加する

This is were the magnet was and were the chip was attached too. This is were the magnet was and were the chip was attached too.
  • This is were the magnet was and were the chip was attached too.

コメントを追加する

This is what the Finished product should look like. These are the things that you will find when you take apart you ear bud
  • This is what the Finished product should look like. These are the things that you will find when you take apart you ear bud

コメントを追加する

Nicki and AJ

メンバー登録日: 2010年10月27日

261 ポイント

1ガイドが承認済み

コメントを追加する

統計データを表示:

過去 24時間: 4

過去 7 日: 40

過去 30 日: 133

今までの合計 6,782