この分解は修理ガイドでは ありません。 お持ちのDualShock 4を修理する際は、iFixitの修理ガイドをご利用ください。

  1. Begin by removing the screws  in the back of the controller.
    • Begin by removing the screws in the back of the controller.

  2. Remove the analog sticks and motors.
    • Remove the analog sticks and motors.

    • Remove the top layer PCB. The PCB must be popped out of place and then angled in such a way that the trigger buttons at the top of the controller slide out of their slots.

    • Remove the second layer PCB. This simply pops out of place.

    • Flip over the second layer PCB. Remove the battery from its holder.

    • Unscrew the two screws holding the light assembly together. Once the screws are undone, the parts of the assembly can be pulled out.

    • Unscrew the two screws holding down the USB module.

Joshua Wong

メンバー登録日: 2018年11月28日

175 ポイント

1ガイドが承認済み

Thanks this was so helpful because every time I do this I break it like literally break the plastic

nodachi Galaxy poison - 返信

Do you know where I can get broken PS4 controllers?

Chane Akwau Jones - 返信

統計データを表示:

過去 24時間: 32

過去 7 日: 235

過去 30 日: 949

今までの合計 1,590