はじめに

I am going to show you how to take apart this Coby alarm clock with a digital photo frame.

この分解は修理ガイドでは ありません。 お持ちのCoby Digital Photo Frame Alarm Clockを修理する際は、iFixitの修理ガイドをご利用ください。

  1. Here is is, waiting it be torn apart.  Don't worry, I'm not going to wreck it.
    • Here is is, waiting it be torn apart. Don't worry, I'm not going to wreck it.

    コメントを追加する

  2. Here are the specs.  This clock features a computer connection port, an SD card slot for the photo viewer, and buttons, including a snooze button.  It also has an MP3 player, but no headphone jack.  How Strange.  It also does not have internal memory, which is why there in an SD card slot.  But, The real nice thing about it is the fact that it includes a color LCD display!
    • Here are the specs. This clock features a computer connection port, an SD card slot for the photo viewer, and buttons, including a snooze button. It also has an MP3 player, but no headphone jack. How Strange. It also does not have internal memory, which is why there in an SD card slot. But, The real nice thing about it is the fact that it includes a color LCD display!

    コメントを追加する

    • After two outer case screws are removed, The two halves of the case can be easily snapped apart.

    コメントを追加する

    • Our first look. Beautiful, isn't it?

    コメントを追加する

    • Too bad the speaker and control wires are soldered to the logic board. The speaker is held on by two solder pads. The button control cable connecter may look like it's detachable, but it wouldn't come out. It looks like They get to spend the rest of their lives chained together. But what about the LCD? Is that replaceable?

    コメントを追加する

    • Yes! the LCD is not soldered on the logic board. It is held in by a ribbon cable connecter. It can easily be removed.

    • What a pain it would be to have it soldered in the logic board.

    コメントを追加する

    • After taking out two screws, the inner snooze button comes out.

    • They are 2 buttons on this board, along with a few capacitors and resistors.

    コメントを追加する

    • After removing the three screws holding down the control pad board, It can be easily lifted out.

    • On the other side of the board, just buttons.

    コメントを追加する

    • they are 2 metal clamps held on by each one screw, holding the LCD down. Make the screw a little loose and turn each clamp around.

    コメントを追加する

    • But before the LCD can be removed, the outer snooze button assembly has to come out. It is held on by two screws.

    コメントを追加する

    • The LCD can finely be removed!

    • The screen quality and size is not too bad for the price I paid for it.

    コメントを追加する

    • These two plastic pieces hold down the speaker and logic board to the rear case. the screws holding them down must be removed.

    コメントを追加する

    • Lifting out the logic board and speaker.

    コメントを追加する

    • Here is the bare logic board, front and back view.

    コメントを追加する

    • The chip. The brain. The micro controller. My favorite part.

    • Their is only one chip on this logic board. No wonder their is no internal memory. This is just the CPU.

    コメントを追加する

    • Done!

    • I would give this a score of 7 out of 10. I am deducting 3 because some parts were soldered to the the logic board, making replacement difficult.

    • The good side is that the screen was replicable, and the fact that the whole thing was held together by screws, and not glue.

    コメントを追加する

Jonathan Lumley

メンバー登録日: 2011年05月02日

119 ポイント

1ガイドが承認済み

コメント1件

2011 tear down, but here in 2016 December I actually found that useful. Thanks for taking the time to share.

misc - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 5

今までの合計 3,951