メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

この分解は修理ガイドでは ありません。 お持ちのClevo Sager Eurocom P650RG Gを修理する際は、iFixitの修理ガイドをご利用ください。

  1. Not a full teardown; just board photos (both sides) and things that I couldn't find on the Internet easily.
    • Not a full teardown; just board photos (both sides) and things that I couldn't find on the Internet easily.

  2. Internal battery, 60Wh
    • Internal battery, 60Wh

  3. Top assembly. Screen is attached to top case. The two 2W speakers are quite large and sound fairly nice, surprisingly. Doesn't look like they're ported enclosures.
    • Top assembly. Screen is attached to top case.

    • The two 2W speakers are quite large and sound fairly nice, surprisingly. Doesn't look like they're ported enclosures.

  4. The copper heatsink is screwed onto the bottom cover. The CPU fan draws air through this area (not a lot though).
    • The copper heatsink is screwed onto the bottom cover. The CPU fan draws air through this area (not a lot though).

    • Copper heatsink with heat pads for the CPU and GPU voltage regulator MOSFET/inductors. During reassembly, make sure no wires cover the MOSFETs

  5. Board Photos bottom side Board Photos bottom side Board Photos bottom side
    • Board Photos bottom side

  6. Intel Core i7-6820HQ, DDR4 RAM, GTX980M can be seen here. Intel Core i7-6820HQ, DDR4 RAM, GTX980M can be seen here. Intel Core i7-6820HQ, DDR4 RAM, GTX980M can be seen here.
    • Intel Core i7-6820HQ, DDR4 RAM, GTX980M can be seen here.

Larry Chen

メンバー登録日: 2013年04月22日

896 ポイント

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 6

過去 30 日: 33

今までの合計 2,807