はじめに

The only tools needed are a philips screwdriver and a narrow putty knife.

この分解は修理ガイドでは ありません。 お持ちのBelkin Express Dockを修理する際は、iFixitの修理ガイドをご利用ください。

View of the connectors
  • View of the connectors

コメントを追加する

Use a putty knife to remove the four rubber feet.  Once removed, there are 4 phillips screws to be removed. Use a putty knife to remove the four rubber feet.  Once removed, there are 4 phillips screws to be removed.
  • Use a putty knife to remove the four rubber feet. Once removed, there are 4 phillips screws to be removed.

コメントを追加する

The next step is to use the putty knife to pry off one of the two plastic endcaps, they snap out and the circuit board slides out.
  • The next step is to use the putty knife to pry off one of the two plastic endcaps, they snap out and the circuit board slides out.

コメントを追加する

Use the phillips screwdriver to remove 5 more screws to remove the plastic mounting frame.
  • Use the phillips screwdriver to remove 5 more screws to remove the plastic mounting frame.

コメントを追加する

Front and back of the board. From left to right on the front of the board the major chips are:  LSI FW643E-02 (FIreWire800); Broadcom BCM57762 (gige); Intel L150I56 (Thunderbolt controller), NXP LPC1114F (two), Fresco FL1100 (USB3); C-Media CM119A (Audio)
  • Front and back of the board.

  • From left to right on the front of the board the major chips are: LSI FW643E-02 (FIreWire800); Broadcom BCM57762 (gige); Intel L150I56 (Thunderbolt controller), NXP LPC1114F (two), Fresco FL1100 (USB3); C-Media CM119A (Audio)

  • From left to right on the back of the board the major chips are: Parade PS161HDM; Parade PS8301 (two); NXP ZSD310 (two); Parade PS8321. The chips seem to support HDMI/DVI conversion and Display Port!

コメントを追加する

close-ups of the major chips close-ups of the major chips close-ups of the major chips
  • close-ups of the major chips

コメントを追加する

thompsonfamily

メンバー登録日: 2011年01月21日

217 ポイント

1ガイドが承認済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 11

過去 30 日: 52

今までの合計 3,574