メインコンテンツにスキップ

必要な工具と部品

この分解は修理ガイドでは ありません。 お持ちのApple Watchを修理する際は、iFixitの修理ガイドをご利用ください。

  1. Apple Watch Teardown, Apple Watch Teardown: 手順 1、 1の画像 1
    • Sehr geehrte Damen und Herren, die Apple Watch ist angekommen. Aber bevor wir zum Wesentlichen kommen, hier ein kurzer Überblick über die technischen Details:

    • Druckempfindliches, flexibles, Touchscreen AMOLED Retina Display

    • Das eine Modell misst 38 mm (vertikal) mit 272 x 340 Pixeln (290 ppi), das andere 42 mm (vertikal) mit 312 x 390 Pixeln (302 ppi)

    • Speziell designtes Apple S1 SiP (System in Package)

    • 8 GB eingebauter Speicher

    • NFC + Wi-Fi 802.11b/g/n + Bluetooth 4.0

    • Beschleunigungssensor + Gyroskop + Herzfrequenzmessgerät + Mikrofon + Lautsprecher

    • Watch OS

    I actually got a notification for this teardown on my watch! Almost like it's brother watch was crying out for help...

    Sean Titmarsh - 返信

    Your brother's blood cries out to me from the ground

    Kevin Taylor -

    Man, some months from now we will all laugh at this but right now almost everyone who pre-ordered their Apple Watch is crying at the sight of this.

    Carlos Perea - 返信

    The watch is OK, I guess, but the band is a winner!

    lainelee - 返信

    Going through the breakdown steps of the Apple watch, it appears to be a nice piece of kit. One question I may ask, would it get any new firmware updates and how will be done?

    Taki59 - 返信

  2. Apple Watch Teardown: 手順 2、 3の画像 1 Apple Watch Teardown: 手順 2、 3の画像 2 Apple Watch Teardown: 手順 2、 3の画像 3
    • So endet das Warten. Die Apple Watch ist angekommen und natürlich packen wir sie sofort aus.

    • Obwohl wir hofften ein goldenes Ticket in die Schokoladenfabrik zu erhalten, finden wir das zweitbeste Ding: die Apple Watch Sport, inklusive Sportarmband, Aufladekabel und Netzstecker.

    • Ein großes Dankeschön an MacFixit Australien, die uns für die Demontage ihre Räumlichkeiten in Melbourne überlassen. Sie verkaufen Mac und iPhone Teile/Zubehör und unsere iFixit Toolkits.

    That settles it: I'm getting the blue band. I think it looks pretty slick (as does the packaging).

    CJ Schmid - 返信

    I went with the blue band for mine. Can't wait to see it in person :)

    John -

  3. Apple Watch Teardown: 手順 3、 3の画像 1 Apple Watch Teardown: 手順 3、 3の画像 2 Apple Watch Teardown: 手順 3、 3の画像 3
    • Wir waren bereit, die Apple Watch auseinanderzunehmen, bis wir von einer schicken Grafikanimation abgelenkt wurden. Oooh, was für hübsche Farben.

    • Nicht sicher wie das originelle Sportarmband befestigt wird? Hab keine Angst – Apple hat die Anleitung dazu auf die Rückseite des Armbands gedruckt.

    • Es besteht kein Bedarf an lästigen Ladekabeln – die Apple Watch bietet MagSafe induktives Aufladen, bei dem die Uhr magnetisch mit der Aufladestation verbunden wird. Apple wirbt außerdem mit einem "...komplett versiegelten System, frei von offenen Kontakten."

    Can you please post the exact measurements of the charger?

    Thank you and blue skies!

    Jerry Salinas - 返信

    The charging cradle is 6.7 mm thick with a diameter of 28 mm.

    Walter Galan -

  4. Apple Watch Teardown: 手順 4、 2の画像 1 Apple Watch Teardown: 手順 4、 2の画像 2
    • Wir richten unsere Aufmerksamkeit auf die Rückseite des Gehäuses, wo wir eine zusammengesetzte Abdeckung finden, bei der polymerbeschichtete, optische Linsen eine Reihe LEDs und Fotodioden schützen.

    • Der speziell designte Herzfrequenzsensor nutzt eine Kombination aus Sensoren für Infrarotstrahlung und sichtbares Licht, um deine Herzfrequenz zu messen.

    • Anders als bei der Apple Watch Sport bestehen die Rückseiten der Apple Watch und der Apple Watch Edition aus einer Zirconia-Keramik Abdeckung mit Saphirlinsen.

    • Gegenüber der digitalen Krone finden wir das Mikrofon und die Lautsprecher-Öffnungen.

    I think the back piece on the Sport watch is composite, not ceramic

    Tim Camber - 返信

    Correct. According to footnote on Apple Watch site: "Sport models have a composite back with hard

    coated optical polymer lenses."

    http://www.apple.com/watch/technology/

    The backs on the Watch and Edition collections are zirconia ceramic with sapphire crystal lenses

    http://www.apple.com/watch/craftsmanship...

    Ryan Mack -

    Good catch. We've updated the teardown. Thanks!

    Walter Galan -

    Not an LCD, so no LCD connector.

    Sam Davis - 返信

    Sam - So does this mean it is an OLED screen if not LCD?

    randallhlee -

    ..and the microphone is from?

    Raul Piper - 返信

  5. Apple Watch Teardown: 手順 5、 3の画像 1 Apple Watch Teardown: 手順 5、 3の画像 2 Apple Watch Teardown: 手順 5、 3の画像 3
    • Bevor die Uhr auf das Hackbrett kommt, versuchen wir etwas weniger Zerstörerisches: das Armband entfernen.

    • Durch Drücken des Knopfes auf der Geräte-Rückseite wird ein federbelasteter Metallstift im Armband gelöst, wodurch dieser einfach aus der Halterung geschoben werden kann.

    • Wenn du dich auf das Tauschen der Armbänder freust, gibt es nicht viel zu beachten. Allerdings will Apple, dass du nur Armbänder aus der selben Kollektion nutzt. Kein Gliederarmband für deine Watch Sport, sorry.

    • Das Sportarmband ist komplett aus Plastik – genauer Elastomer – ohne Metallstifte zur Fixierung.

    • Montiert in China!

  6. Apple Watch Teardown: 手順 6、 1の画像 1
    • Im Einschub des Sportarmbands finden wir eine geheimnisvolle Abdeckung – eine Art Tür.

    • Wofür ist diese Tür? Wohin führt sie? Wir werden es vielleicht nie erfahren... aber sie sieht aus wie die berichtete Diagnose-Schnittstelle.

    • Bei genauerem Hinschauen finden wir an der Seite der Apple Watch auch noch die Modellnummer: A1553.

    • Die Apple Watch gibt es in zwei verschiedenen Modellnummern: A1553 für das 38 mm Gehäuse und A1554 für das 42 mm Gehäuse.

    Could you show us the strapping mechanism for the band?

    qiun - 返信

    Is that model number text as misaligned with the port as it looks?

    mward - 返信

  7. Apple Watch Teardown: 手順 7、 3の画像 1 Apple Watch Teardown: 手順 7、 3の画像 2 Apple Watch Teardown: 手順 7、 3の画像 3
    • Um die Apple Watch besser halten zu können, befestigen wir das Sportarmband wieder an der Uhr.

    • Unbeeindruckt vom Fehlen jeglicher äußeren Schrauben zaubern wir einen iOpener hervor und arbeiten uns ins Innere des Prachtstücks vor.

    • Dazu verzichten wir auf unsere traditionellen Öffnungswerkzeuge und gehen mit aller Kraft, die das iFixit Messer aufbringen kann, an das Display.

    • Mit den iFixit Opening Picks geben wir der Uhr den Rest und öffnen sie - ein Kinderspiel.

    What was actually holding the screen itself down? And can you show further disassembly of the screen?

    tonyluciani - 返信

    and there goes any water resistance... How would one even make their watch water resistant when replacing the screen? I guess it wouldn't be... even if I was told, *use this* glue/tape and it will be, I wouldn't trust it..

    Will - 返信

  8. Apple Watch Teardown: 手順 8、 3の画像 1 Apple Watch Teardown: 手順 8、 3の画像 2 Apple Watch Teardown: 手順 8、 3の画像 3
    • In Erwartung eines Kabelwirrwarrs - vor allem vom Display und dem Touchscreen - heben wir das Display behutsam an.

    • Die Abtrennnung des Displays gestaltet sich recht schwierig, da die Kabel unter einer federnden Klammer eingeklemmt sind (nicht unähnlich der Touch ID Kabelabdeckung des iPhone 5s).

    How do you stick the display screen back?

    Jx Corp - 返信

    You’ll need either the Touch Force gasket or the die cut adhesive strips. Both are sold by IFIXIT.

    Dan -

  9. Apple Watch Teardown: 手順 9、 3の画像 1 Apple Watch Teardown: 手順 9、 3の画像 2 Apple Watch Teardown: 手順 9、 3の画像 3
    • Nachdem das Display entfernt ist machen wir sofort zwei hoch angepriesene Apple Watch Besonderheiten ausfindig: die Taptic Engine und die digitale Krone.

    • Es scheint, als ob sogar die einfache Watch Sport ein bisschen Glitzergold abbekommt - zumindest reicht es für eine vergoldete Antenne.

    I think the question on everyone's mind is will that s1 chip be replaceable. Doesn't look easy to get to.

    Arvin - 返信

    Oh , unfortunately I could not find out where's Pressure sensor underneath the display.

    It's another key topics of differentiator on Apple watch

    neptune neptune - 返信

  10. Apple Watch Teardown: 手順 10、 2の画像 1 Apple Watch Teardown: 手順 10、 2の画像 2
    • Mit diesem frühen Foto vergleichen wir die Innereien der Apple Watch mit denen einer klassisch-mechanischen Uhr, die so alt wie die Zeit selbst ist.

    • Auf der rechten Seite der Taschenuhr-Mechanismus von circa 1890. (Die Uhr ist zwar 125 Jahre alt, aber würde auf keine Ü40-Party kommen.) Auf der linken Seite die Smartwatch von 2015.

    • Welche wird wohl die andere überleben?

    • Auch wenn wir immer noch mit einer Uhr arbeiten, macht das zweite Foto deutlich, wie sehr sich die Werkzeuge für eine Routine-Reparatur verändert haben.

    • Unsere Freunde auf der linken Seite kennst du bereits: Opening Picks, Pinzette, Schraubendreher und Messer.

    • Auf der rechten Seite, mit den Mickey Mouse Ohren, befindet sich ein Anker-Werkzeug. Direkt rechts daneben liegt ein Mini-Handbohrer. Darunter haben wir ein Werkzeug für die Justierung des Hebelsteins...

    • ...und rechts daneben eine Pinzette. Manche Dinge verändern sich eben nie (auch wenn unser lokaler Uhrmacher meint, dies wäre eigentlich nur "die Schraubenhalterung des faulen Mannes").

    I thought you were pulling another April Fool's joke when I saw this photo. :)

    jrj - 返信

    Interesting that you chose a tuning fork watch for a comparison device. Most of your readers might not be familiar with this fine timepiece. I would love to see a teardown on this one :).

    scottlvance - 返信

    The tuning fork timepiece mechanism is from an Accutron. If you google Accutron Spaceview you can see it in pictures. I have one of these watches, they look great!

    Don Beckstein - 返信

    Bulova Accutron sighting!!!

    brepettis - 返信

  11. Apple Watch Teardown: 手順 11、 3の画像 1 Apple Watch Teardown: 手順 11、 3の画像 2 Apple Watch Teardown: 手順 11、 3の画像 3
    • Ein kurzes Hebeln mit einem Öffnungswerkzeug aus Weichplastik löst den milden Kleber, der den Akku in der Uhr fixiert.

    • Dieser winzige 3,8 V, 0,78 Wh Li-Ion Akku treibt die 38 mm Apple Watch an. Apple behauptet, der 205 mAh Akku reicht für 18 Stunden Nutzung (was 6,5 Stunden Audiowiedergabe, 3 Stunden Sprechdauer oder 72 Stunden Standby entspricht).

    • Laut Apple "basiert die Akkuleistung auf Tests der 38 mm Apple Watch. Eine 42 mm Apple Watch hat üblicherweise eine längere Akkulebensdauer."

    • Ein 205 mAh Akku wirkt klein im Vergleich zu den 300 mAh Akkus, die in der Moto 360 und Samsung Gear Live verbaut sind. Hoffentlich hilft Apple's Watch OS die Akkulaufzeit zu verlängern und die anfänglichen Probleme der Moto 360 zu vermeiden.

    Can we get the physical dimensions of the cell itself?

    gary - 返信

    It would be nice to know the weight as well.

    mbeatty -

    Any info on the battery connector used? i.e. part number?

    pixbroker - 返信

    according to the photo: 3.80V, 0.78Whr, 205mAh, Model A1578, 1icp5/18/26

    Henny Wong - 返信

  12. Apple Watch Teardown: 手順 12、 3の画像 1 Apple Watch Teardown: 手順 12、 3の画像 2 Apple Watch Teardown: 手順 12、 3の画像 3
    • Während wir uns zum S1 SiP vorarbeiten, finden wir die kleinste Tri-Wing Schraube, die wir je gesehen haben.

    • Nein, wir glauben wirklich nicht, dass Apple Reparierbarkeit im Sinn hatte, als sie die Uhr entwickelt haben.

    • Es kommt sehr selten vor, dass wir nicht das richtige Werkzeug zur Hand haben. Hier taugt aber sogar unser kleinster Bit nicht. Wir wurden noch nie herausgefordert – aber hier müssen wir einige Modifikationen vornehmen.

    the S1 disintegrates into conformal powder if you try to open the case...

    Kevin Taylor - 返信

    Is that a barcode beneath the "S1" designation?

    Miroslav Djuric - 返信

    Definitely looks like one. I'd venture a guess that it's not much different than barcodes/data matrices found on other processors, likely acting as an identifier of some sort (plate no., serial no., lot no., etc.).

    kappanjoe -

    I've seen triwing screws about that size before, in the old compact flash sized disk drives made by IBM (now Hitachi Global Storage). I want to do a teardown of mine, but I too will have to make my own tools to do so.

    jrehwin - 返信

    The screws appear to be MicroStix 3ULR and referenced here www.j-osp.com/en/products/neji.html. The micro screws are patented by OSG Japan. As jrehwin mentions, they first showed up in Hitachi and Seagate 1" hard disk drives then later in MS Zune player and gaming systems. Licensed to Unisteel Singapore. Source for licensed bit manufacturer is unknown.

    Given the quantity of Apple watches to be produced and the volume of screws needed to meet that demand, the screws will have to be formed, not machined. To deliver torque, the slanted 3-lobe recess design works with minimal depth providing enough strength for adequate clamp load. The difficulty in making and forming the screws lies within the very thin head and depth of recess required. The blue material shown on one of the screw threads is a chemical patch. It works as an adhesive to prevent vibrational loosening in very short threads.

    Henabel - 返信

    Alternate screw recess designs are possible; 5-lobe like found on the iPhone, Torx Plus, Nacro, 00 or 000 Phillips, and MorTorq Super MTS-04 micro screw. Each design offers certain drive system strength capability but limited by head thickness and minimal thickness of the components being fastened together. Secondary function of the recess is to provide some level of tamper resistance as driver bits are not readily available.

    Henabel - 返信

    Here's the Tri-point Y000 Screwdriver driver: IF145-309-2 [リンクされた製品が存在しない、もしくは無効: IF145-309]

    mayer - 返信

  13. Apple Watch Teardown: 手順 13、 2の画像 1 Apple Watch Teardown: 手順 13、 2の画像 2
    • Da in der Apple Watch nur sehr begrenzt (Welt-)Raum ist, wurde das Flachbandkabel des Mikrofons sehr geschickt zwischen der inneren und der äußeren Gehäusewand verstaut.

    That’s the force touch sensor flex cable: https://www.ebay.co.uk/itm/292620286556

    kip - 返信

    Yes the tweezer is grasping the force touch sensor. I think the writer was pointing out how the mic connector is inter-woven between the parts when you also look at the second image.

    Dan -

  14. Apple Watch Teardown: 手順 14、 3の画像 1 Apple Watch Teardown: 手順 14、 3の画像 2 Apple Watch Teardown: 手順 14、 3の画像 3
    • Es ist an der Zeit, die Taptic Engine zu entfernen, welche auf Höhe der Lautsprecher sitzt.

    • Die Taptic Engine ist die Apple Version eines Linearantriebs. Sie erzeugt Bewegung in einer geraden Linie (im Gegensatz zur Kreisbewegung eines elektischen Motors), welche haptisches Feedback zurückgibt.

    • Es ist sinnvoll, die Taptic Engine mit dem Lautsprecher zu verbinden. Geschickt mit subtilen Tonsignalen des speziell entwickelten Lautsprecher-Treibers kombiniert, soll die Taptic Engine einzigartige Bewegungen produzieren.

    Can you compare the Watch's Taptic Engine with the Macbook's?

    brunobarcelos - 返信

    What are the dimensions of the Taptic Engine, the battery and the interior space?

    Perhaps we can figure out how much bigger a battery that the 42mm can have.

    KDarling - 返信

    WARNING - they just ruined the watch in this step. They ripped off the flex coming from the battery. you can see it in step 16 pic 1. this is non-replaceable. Apparently, ifixit didnt put this watch back together again. i figured this out using this guide to change the housing on my watch, which is now ruined.

    karl - 返信

    Correct, which is why there's a warning that this is not a repair guide right at the top of the page. When a device is dismantled for the very first time and the manufacturer doesn't publish the service manual, there's a lot of guesswork involved and things sometimes get damaged. Don't try to use a teardown as instructions!

    Jeff Suovanen -

    A little note in the section where things are damaged would be helpful Jeff.

    john - 返信

  15. Apple Watch Teardown: 手順 15、 2の画像 1 Apple Watch Teardown: 手順 15、 2の画像 2
    • Der Lautsprecher ist durch einen O-Ring spritzwassergeschützt. Wie alles andere in der Apple Watch ist er winzig.

    • Apple hat die IPX7 Wasserfestigkeit stark beworben. Die verwendeten Dichtungen helfen, aber Temperaturschwankungen bringen jedes Metall dazu, sich leicht zusammenzuziehen oder auszudehnen. Dies kann die Versiegelung stark beeinträchtigen.

    • Für die, die es ganz genau wissen wollen: IPX7 bedeutet, dass die Apple Watch in einem Meter Tiefe höchstens bis zu 30 Minuten unter Wasser aushält.

    • Apple empfiehlt, diese Höchstgrenzen nicht auszuprobieren, und erklärt, dass man "...die Apple Watch während dem Training, bei Regen, und beim Hände Waschen tragen und nutzen kann, aber nicht untertauchen sollte".

  16. Apple Watch Teardown: 手順 16、 3の画像 1 Apple Watch Teardown: 手順 16、 3の画像 2 Apple Watch Teardown: 手順 16、 3の画像 3
    • Wir entnehmen vorsichtig die Antenneneinheit, die geschickt in einer Vertiefung des Gehäuses verstaut ist.

    • Wir wetten, dieses kleine Teil ist für WLAN und Bluetooth der Apple Watch zuständig. Neuere Apple-Patente deuten an, dass Teile der Antenneneinheit in das Gehäuse integriert werden können.

    I would daresay that discreetly is a more appropriate spelling

    pmcgrane - 返信

  17. Apple Watch Teardown: 手順 17、 2の画像 1 Apple Watch Teardown: 手順 17、 2の画像 2
    • Was ist das? Ein Handy für Ameisen? Wie bei einer Miniatur-Version des iPhones finden wir ein Sensorkabel mit einem mechanischen Knopf.

    • Der kleine Knopf hat sogar eine kleine Abdeckung und eine kleine Dichtung.

  18. Apple Watch Teardown: 手順 18、 3の画像 1 Apple Watch Teardown: 手順 18、 3の画像 2 Apple Watch Teardown: 手順 18、 3の画像 3
    • Nachdem wir kurz zwei winzige Tri-Wing Schrauben gelöst haben können wir ein kleines Paneel vom Gehäuse abnehmen.

    • Dahinter finden wir mehrere Kontakte, die genau zur Position des versteckten Diagnose-Ports passen.

    • Um nicht ungewollt einen Kontakt herzustellen, trennen wir sofort diesen kleinen Anschluss.

    • Da wir die Abdeckung des Diagnose Ports immer noch nicht entfernen können, drücken wir es durch die kleinen Löcher im Innern des Gehäuses frei.

    • Es muss einen einfacheren Weg geben, an diesen Port zu kommen, als die ganze Uhr auseinander zu nehmen - leider sind wir nicht in die Geheimnisse von Apple eingeweiht.

    My guess is that the diagnostic port cover isn't meant to be removed. On the manufacturing line they probably have a test station that runs a series of functional tests on the device and once those are complete, they close up the port. It looks like a tight fit so the force of insertion locks it in place.

    Rick Mellor - 返信

    Is the cover of the diagnostic port cover plastic or metal? How is it secured to the case?

    Ameen Amanat - 返信

    A small hole can be seen on the door. Isn't it screw-threaded? If so, it will be able to open by sinking a screw longer than the thickness of the door.

    Motosuke - 返信

    Is any part of the diagnostics port magnetic (like magsafe)? Is there any way to tell if power, rather than just data, is able to transfer though the port? If so, it would definitely point towards future smart bands. Sure, a smart band could have it's own battery supply that doesn't connect with the watch, preventing it from leaching precious battery life, but then you'd have to charge two separate devices (band and watch) every day. If power could transfer through the diagnostics port, then not only could you have battery packs in smart bands to help power the watch itself, but also you'd only have to charge one device each night (the watch could then recharge the bands).

    kdavis - 返信

    This is cool suggestion!!!!

    Aleksandra Perry -

    You don't need to unscrew to remove the tiny panel. It just comes out using a sharp tool like an artists knife. Unscrewing is only necessary to remove the contacts ribbon.

    seaniepie - 返信

    Yes, It’s coming of with little bit force, piked with thin sharp, but strong enough to not bend tool. It looks like little bit glue under, and looks like my be magnet to. I did not play with it much:)

    Aleksandra Perry -

  19. Apple Watch Teardown: 手順 19、 3の画像 1 Apple Watch Teardown: 手順 19、 3の画像 2 Apple Watch Teardown: 手順 19、 3の画像 3
    • Wir entfernen die Klammer der digitalen Krone, die letzte Hürde vor dem S1 SiP.

    • Wir spüren die Kraft, als wir vorsichtig die Zukunft der Menschheit den S1 aus dem Gehäuse lösen.

    • Die Rückseite des S1 ist nicht so schön wie die Vorderseite - da Flachbandkabel die Peripherie verbinden und von einem Klecks Kleber an ihrem Platz gehalten werden hinterlässt der Chip ein übles Durcheinander.

  20. Apple Watch Teardown: 手順 20、 3の画像 1 Apple Watch Teardown: 手順 20、 3の画像 2 Apple Watch Teardown: 手順 20、 3の画像 3
    • Diese Gewirr aus dem Gehäuse zu ziehen ist eine recht zerstörerische Angelegenheit, aber nachdem wir einige gelötete Anschlüsse abgerissen haben erblicken wir zum ersten Mal den S1 in voller Pracht.

    • Leider haben sich die Gerüchte über die Aufrüstbarkeit nicht erfüllt. Alleine die Schwierigkeit den S1 zu entfernen weckt erhebliche Zweifel an der Idee, Komponenten einfach auszutauschen.

    • Leider täuscht unser erster Eindruck sehr - die silberne Abdeckung des S1 ist gar keine Abdeckung! Es ist ein fester Block aus Kunstharz, der die Komponenten tief in sich versteckt.

    • Chipworks hat diesen kleinen IC-Baustein als den STMicroelectronics C451 mit Gyroskop und Beschleunigungsmesser identifiziert.

    Yikes - I think you'll need Chipworks assistance getting inside that chunk. Probably have to boil it in Novec, followed by acid for several hours to reach the meat'n taters...

    Sonar Tech - 返信

    The wireless charging antenna inside the base is certainly compact and cute. Looks like it's not a continuous wire loop, but a U-shape printed "coil". Is this Qi-based, or something proprietary like I'd expect?

    Sonar Tech - 返信

    I've seen that the Moto 360 does in fact charge using the Apple Watch Charging Cable, leading me to believe that it could possibly be considered "Qi-based."

    http://watchaware.com/post/11095/apple-w...

    Nathan Larsen -

    What are the dimensions of the S1?

    What is its size as compared to other smartwatch circuit boards?

    KDarling - 返信

    Is there any way to repair the gyroscope?

    Pepsolman - 返信

    The only way is to replace the entire SIP module.

    Dan -

  21. Apple Watch Teardown: 手順 21、 2の画像 1 Apple Watch Teardown: 手順 21、 2の画像 2
    • Nachdem wir den S1 entfernt haben, wenden wir uns wieder dem Display zu und finden einen einsamen Chip:

    • Den Touchscreen Controller AD7166 auf ARM Cortex M3-Basis von Analog Devices

    • Analysten erwarteten, dass LG der Lieferant für die Apple Watch Retina Displays wird. Unsere aktuelle Vermutung ist, dass die Uhr mit einem Plastic AMOLED von LG ausgestattet ist.

    • Vorsichtig ziehen wir mit einer Pinzette das nächste Bauteil ab, was ein Umgebungslichtsensor zu sein scheint.

    • Wir wetten, dies ist einer der neuen solarbetriebenen Umgebungslichtsensoren. Diese ermöglichen, dass der Sensor sich hinter dem Display befindet, im Gegensatz zum traditionellen Design der meisten Smartphones und Tablets, bei denen dieser auf der Vorderseite liegt.

    I'm looking forward to a firm confirmation whether this "flexible Retina" display is LCD or OLED technology. If the latter is confirmed as rumored, it's a great validation of OLED technology, namely Universal Display Corporation and all players in that supply chain.

    --EDIT-- I now see in step one "Pressure-sensitive, flexible, touchscreen AMOLED Retina display.". Cheers! Thanks ifixit!!

    randallhlee - 返信

    Great validation of OLED technology? Not really. Just because it's a good fit for one purpose, doesnt make it the right solution for a different task, like a cellphone display for example.

    OLED and LED screens both have their individual advantages and disadvantages.

    Victor Szulc -

    Wait, how is there an ambient light sensor behind/in the screen?! ...or am I mistaken?

    mbrandonlee - 返信

    I was wondering the same thing! I assume that's exactly what it is, since the watch will put the screen to sleep if you cover it with your hand, but I would also assume that the AMOLED display would interfere with the sensor.

    kappanjoe -

    It appears to be some new Apple tech that allows for light to be sensed through the display, using a special type of solar cell. Pretty cool right?

    Geoff Wacker -

    I'm missing the reveal of the touch force sensor.

    Maybe this isn't a ALS but some kind of low distance sensor that measures indirectly the force the user presses at the display.

    knochi77 - 返信

    Well spotted. There indeed is no mention of the force pressure sensor, the black strip around the chassis rim under the glass.

    seaniepie -

    это просто датчик освещенности чтобы не делать отдельную дырку как на смартфонах . очень технологично

    Sasha Pups - 返信

    экономия места и дизайн

    Sasha Pups - 返信

  22. Apple Watch Teardown: 手順 22、 3の画像 1 Apple Watch Teardown: 手順 22、 3の画像 2 Apple Watch Teardown: 手順 22、 3の画像 3
    • Wie es aussieht hat die digitale Krone ein Gebersystem, ähnlich dem des Nest Thermostat, um die Drehgeschwindigkeit des Ziffernblattes abzulesen.

    • Drehgeber funktionieren, indem sie die Neigung eines Stiftes in analogen oder digitalen Code umwandeln, der von Computern verarbeitet werden kann.

    • Das Gebersystem hängt am Kabel des Knopfes, zusammen mit dem Druckknopf und den Kontakten des Diagnose-Ports.

    • Bei der ganzen Peripherie fragen wir uns, ob Apple die Absicht hat, ein Upgrade-Programm für die Apple Watch anzubieten. Die Elektronik auseinanderzunehmen ist sehr kompliziert und zeitraubend - nicht die Art von Reparatur für die dein lokaler Reparaturladen ausgerüstet ist. Wir vermuten, Apple könnte eine Mailorder-Option anbieten.

    I guess it must be magnetic encoding

    chavezdavid - 返信

    Like in the sample image I also ruin this flex and I need replacement where can I order. Would you please give me source where can I order this part? https://d3nevzfk7ii3be.cloudfront.net/ig...

    Noel Macapugay - 返信

    Hi … I also ruin this flex during the dissembly … i didn’nt find it on any website … could you help me pleas ??

    claverin philippe -

  23. Apple Watch Teardown: 手順 23、 2の画像 1 Apple Watch Teardown: 手順 23、 2の画像 2
    • Auf dem Gehäuseboden der Uhr finden wir aufregende Sensoren. Und Linsen.

    • Apples Herzfrequenzmesser ist eigentlich ein Plethysmograph – er sieht aus und funktioniert wie ein Pulsoxymeter, aber Apple bewirbt nicht, dass die Uhr den Sauerstoffgehalt im Blut messen kann. Wieso?

    • Wir vermuten, es geht um Vorschriften der FDA (Food and Drug Association).

    • Ebenfalls am Boden der Uhr finden wir einen Magneten, um die Uhr sicher am Induktions-Ladegerät zu befestigen.

    • Die Spule in der Kunststoff-Abdeckung kommt uns bekannt vor. Dies ist die Spule um die Uhr per Induktion aufzuladen.

    • Chipworks hat den OPA2376 Precision von Texas Instruments, ein für geräuscharmes und bewegungsloses Arbeiten bekannter Spannungs-Operationsverstärker, als Teil der Sensoren identifiziert.

    In order to measure Blood oxygen levels you need a Red and an IR LED. Can you confirm that the watch has this? Just because its a plethysmograph doesn't mean it can measure oxygen levels. It needs the different wavelengths to determine the ratio of oxygenated hemoglobin, and non oxygenated. All I have ever seen is green LEDs, which are not capable of doing this. What makes you think its capable of being a Oximeter.

    Sean Hodgins - 返信

    Hopefully they will enable O2 measurement in a future software update. The Apple Watch does have IR diodes in addition to the green ones. From <https://support.apple.com/en-us/HT204666>:

    ----------------

    How Apple Watch measures your heart rate.

    The heart rate sensor in Apple Watch uses what is known as photoplethysmography. This technology, while difficult to pronounce, is based on a very simple fact: Blood is red because it reflects red light and absorbs green light. Apple Watch uses green LED lights paired with light‑sensitive photodiodes to detect the amount of blood flowing through your wrist at any given moment.

    ...

    The heart rate sensor can also use infrared light. This mode is what Apple Watch uses when it measures your heart rate every 10 minutes. However, if the infrared system isn’t providing an adequate reading, Apple Watch switches to the green LEDs. In addition, the heart rate sensor is designed to compensate for low signal levels by increasing both LED brightness and sampling rate.

    William -

    Ps: Green LEDs apparently can be used for reflective oximetry, when paired with infrared. I suspect accuracy is not yet sufficient, or measurements not reliable enough yet, so Apple did not include oximetry in the initial release—but one can hope for signal processing advancements to allow for it in the future.

    William -

    I really don't think you can do it with just infrared and green LEDs. Pulse oximeters use one of two combinations: red and IR, or red and green. The common denominator (and the key to the pulse oximeter, itself) is the red light.

    That's why we have the mnemonic "SeXy DARLing", which stands for "at SiX hundred nm wavelength DeoxyHb Absorbs Red Light". At green wavelengths, both oxygenated and deoxygenated hemoglobin absorb equally, and the same is true at 780nm IR. So, IR and green are the wavelengths you use to calibrate red.

    My best guess, Apple uses IR for the "any time" pulse because it's invisible, and green for the more accurate "on demand" pulse because it's relatively unobtrusive. Shine a green light into skin and it does not go far. Shine a white light, and you get a red halo. Red is the band that propagates through a human body. If they had red LEDs, the light would diffuse a cm or two, enough to light up the skin all around the watch, forming a "halo".

    koloshor -

    Is the gyroscope nestled in within the area at step 23?

    Willy - 返信

    the Gyro should be one the FCB which ifixit has not tear down yet.

    iamedriczhang -

    So, a magnet on the watch. I was wondering why there isn't a compass. Was building a business around a magnetometer. Very disappointed!

    anonymous 5237 - 返信

    It's imposible to measure the relation between oxygenated hemoglobyn and reduced (not oxygenated) hemoglobyn (Hb) without the pair of ir and red lights, is necesary to have this two ligths and receptors for each one light to make a relation between both Hb (oxygenated and reduced) to get a porcentage like 95% of oxygen saturation ( 95% SpO2)

    RSR1 - 返信

    wondering how the watch calculates the heading angle?Isn't compass mandatory for it.I am sure the watch has the pedometer abilities but what about heading or is it calculated with acc+gyro data + mag data from the GPRS/GSM ?

    Raul Piper - 返信

  24. Apple Watch Teardown: 手順 24、 3の画像 1 Apple Watch Teardown: 手順 24、 3の画像 2 Apple Watch Teardown: 手順 24、 3の画像 3
    • Apples Induktionsladegerät ist eine recht große Neuerung und wir freuen uns immer, wenn wir die neuesten Adapter besser kennenlernen.

    • Offiziell Apple Watch Magnetisches Ladekabel genannt, bietet es eine Ladestation mit einer Dicke von 6,7 mm und einem Durchmesser von 28 mm.

    • Nach ein wenig Erhitzen können wir die Rückseite der Ladestation abnehmen.

    • Und finden sie bis zum Rand mit Klebstoff gefüllt.

    To find it filled to the brim with glue! AND SOME WINDINGS + A CORE

    Please take it further apart. Is there a kind of half ferrite potcore in it? Are those real windings inside or is it a coil made of PCB traces?

    Mark de Wit - 返信

    I support the wish to take the loader further apart.

    (btw: Login via Yahoo does not work, states that iFixit uses a deprecated protocol)

    facebook -

    Can you please shoot one photo straight from the side of the charger. To show the position where the cable is connected to the charger. Is it in the middle? It would help us so much if you can also measure the diameter of the cable coming out of the charger disc. Thank you.

    Aderca - 返信

    This may be actually step 25 - the photo of the brass colored coil is kind of odd. It is punctured with about 30 random round holes. Can you see if you can determine what purpose those holes serve?

    rmckenzie10 - 返信

    If it's step 25, I think that's a PCB, not a coil. Those holes might be vias.

    dennis97519 -

    The brass plate supports the plastic studs which the coil windings are secured to. The holes in the plate are filled with the studs.

    Dan -

  25. Apple Watch Teardown: 手順 25、 3の画像 1 Apple Watch Teardown: 手順 25、 3の画像 2 Apple Watch Teardown: 手順 25、 3の画像 3
    • Wir schneiden das Plastik weg, um an den Klebe-Kuchen zu kommen (ebenfalls mit Magnet in der Mitte).

    • Unter dem Magneten finden wir nur ein paar Markierungen, sonst nichts.

    • Apple hat sich in bemerkenswerter Weise aus den Streitigkeiten über Standards für induktives Laden herausgehalten. Teilweise wurde spekuliert, dass Apple eine eigene Methode für kabelloses Laden entwickelt hat. Neueste Apple Patente, die integrierte NFC/Induktions-Ladespulen behandeln, untermauern diese Theorien.

    Please teardown the charging disc completely... there appear to be other goodies inside if you do a complete teardown... such as a flexible printed circuit board, copper wiring for inductive charging, and a magnet for attaching the Apple Watch to the charging disc, and other small metal parts around the perimeter of the disc for unknown purpose... Thanks!

    Steve King - 返信

    Yes, the charger needs a more complete teardown.

    People are reporting that other magnetic chargers, such as the Qi, do not work with the Apple Watch, yet the Apple charger reportedly can be used with at least one other inductively-charged watch. Something's got to be causing this, and some proprietary chip in the charger would explain it (or, it could just be a more powerful field).

    darryl -

    It looks like they potted the whole unit in this clear glue. Is it soft goo, like hot glue, or is it hard like epoxy? Does it soften with heat? I'd love to see the business-end of the charger electronics...

    Sonar Tech - 返信

    Could be interresting to understand how the waveform genereted through the coil are produced (is there any electronic inside the cable? ) THere should be some.

    patrice Hamard - 返信

    I second that call for further investigation of the charger. If you plug one into a Mac and investigate it, first with System Information and then with USB Prober (the latter being an optional download once you have XCode), you find it's got a lot of USB personality. It claims to implement the HID (Human Interface Device) profile with a transfer speed of 12Mb/sec, and provides more (uninterpretable) information when attached to a Watch than when it is not. So there's definitely smarts in there. To what end? Beats me.

    Dominic Dunlop - 返信

  26. Apple Watch Teardown: 手順 26、 2の画像 1 Apple Watch Teardown: 手順 26、 2の画像 2
    • Apple Watch Reparierbarkeits-Index: 5 von 10 (10 ist am einfachsten zu reparieren)

    • Auch wenn es nicht dem Industrie-Standard entspricht, lässt sich das Apple Watch Armband einfach abnehmen und austauschen.

    • Den Bildschirm zu entfernen ist zwar schwierig, aber nicht unmöglich – es ist die erste Komponente, die entfernt wird, und vereinfacht so die Reparatur.

    • Wenn man das Gerät erstmal geöffnet hat ist die Batterie recht einfach zu entnehmen – nur milder Klebstoff fixiert sie im Gehäuse.

    • Auch wenn keine proprietären Schrauben verwendet wurden, erschweren unglaublich kleine Tri-Wing Schrauben die Reparatur - vor allem, wenn alternativ auch Torx- oder Kreuzschlitzschrauben hätten verwendet werden können.

    • Jegliche anderen Komponenten zu entfernen ist im Prinzip unmöglich – alle Kabel der Peripherie sind an die Rückseite des S1 gelötet.

    • Das komplett versiegelte S1 System macht Reparaturen auf Board-Ebene unmöglich.

  27. Apple Watch Teardown: 手順 27、 3の画像 1 Apple Watch Teardown: 手順 27、 3の画像 2 Apple Watch Teardown: 手順 27、 3の画像 3
    • Aber warte, es gibt noch mehr! Nur für begrenzte Zeit kannst du dir eine Demontage anschauen, und bekommst eine zweite umsonst. Du hast richtig gehört, 100% absolut kostenlos!

    • Lerne die wahre Apple Watch kennen: Die Version aus rostfreiem Stahl.

    • Merkwürdigerweise hat die normale Apple Watch eine komplett andere Verpackung als die Apple Watch Sport. Dies könnte daran liegen, dass diverse Bänder erhältlich sind, die nicht wie das Sport Band flach hingelegt werden können.

    Are you going to open it?

    preciosotiempoescaso - 返信

  28. Apple Watch Teardown: 手順 28、 3の画像 1 Apple Watch Teardown: 手順 28、 3の画像 2 Apple Watch Teardown: 手順 28、 3の画像 3
    • Da wir unsere Öffnungsmethode perfektioniert haben ist diesmal das Öffnen der Apple Watch ein Klacks.

    • Keine Überraschungen hier. Innen begrüßen uns dieselben Klammern und Anschlüsse.

    • Es sieht so aus, als ob sich nicht so viel verändert hätte. Die Halteklammer der digitalen Krone sieht deutlich stabiler aus, und an der Unterseite sind nun goldene Tri-point Schrauben.

    • Das war's erstmal – aber wir sind hier noch nicht fertig. Einige Geheimnisse sind noch ungelöst und iFixit ist bald mit mehr Analysen zurück.

    • Schau dir unsere Röntgen-Demontage an, um wenigstens einige Geheimnisse zu lüften!

    Interesting that the bracket holding the digital crown on the steel model seems far more substantial than that of the Sport watch - it looks like a casting rather than sheet metal. I'm guessing that's to keep the weight/cost of the Sport model down, but interesting that the differences aren't just skin deep. The encoder barrel looks like a different design too.

    alexanderjhorne - 返信

    Is the battery bigger? EDIT: Forget that, I thought you were doing a 42mm compared to a 38mm. Silly me.

    Danny Yates - 返信

    Any word on the battery size of the 42mm?

    Remco van den Bosch - 返信

    ditto - would like to know how much bigger it is

    sm -

    ayuda amigos compre un reloj en la web y me llego en modo demo alguien me podria ayudar a sacarlo de ese modo no tiene cuenta icloud estoy dispuesto hacer un aporte economico de ser nescesario al que me brinde la solucion gracias de antemano

    ISAAC - 返信

    I have a apple watch sport series 3 and would like to put my apple watch watch stainless steel series 0 casing on it is that possible? and will it still be water resistant?

    Denzell Koopa - 返信

以下の翻訳者の皆さんにお礼を申し上げます:

en de

93%

これらの翻訳者の方々は世界を修理する私たちのサポートをしてくれています。 あなたも貢献してみませんか?
翻訳を始める ›

66 件のコメント

Will you be tearing down the charging disc? Please say, YES!

Steve King - 返信

What a nicely built piece of hardware, it looks extremely well designed - certainly compared to the duct taped together look of the Moto 360 (talking about the internals only).

jboy10a - 返信

This a beautiful tear-down.

Gama Goat - 返信

Can you tear down the watch band for us! We wanna see whats inside it!

bhud07 - 返信

Yes, please show us

qiun -

How do you tear down solid plastic?

Scott Opper -

I'm missing the repairability score. Guess it must be almost zero for the complete watch, although just replacing the battery must be doable for a skilled repairsman.

aeenkhoorn - 返信

Well the Moto 360 received a 3/10, citing the replaceable bands as a positive, but apparently the battery was quite a bit less manageable to remove. I'm betting this will receive a 3 or a 4.

kappanjoe -

Please tear down the box it came in. I think it has the numbers to the lotto

aka666 - 返信

I don't think you completely tore down the charging disc… please try some more heating and prying to expose every little thing… I suspect there are some other goodies to be revealed … Thanks!

Steve King - 返信

Is the Apple Watch that you teased us with the 38mm or the 42 mm? It looks like it has the same battery as the Apple Sport 38 mm . . .

Great Job - as Always - Thank You!

Nikon1 - 返信

38mm, as it's stated in the back of the Watch

alberto240995 -

So much empty space below battery in Stainless Steel.

I expected even denser guts.

abianchetti - 返信

Do you know the RF Chipset used to talk to The IPhone ?

Jay Kullmann - 返信

Anyone know who the manufacturer of the gyroscope is?

John H - 返信

ST Micro is the manufacture for Gyroscope. Chipworks' discovery of Invensense is based on the prototype iwatch, not the one went to massive production.

iamedriczhang -

You keep posting that STMicro won the gyroscope in the Applewatch. Do you have a link, or just an agenda>

The Chipworks conclusion that INVN won the gyro in Applewatch was released 2 weeks ago - but was not conclusive... although the component they speculated was an INVN gyro is shown in the actual teardown images. Other outlets speculated STMicro is in the watch.

I am pretty sure that no one knows for sure yet... if you do, then please offer something up. Otherwise stop stating speculation as fact.

John A -

ST Micro did both the accelerometer and the gyroscope. That's according to Chipworks teardown anyways...

@JohnA:It's Chipworks who concluded that it's an STMicro part. Please try and pay attention before accusing others of unwarranted speculation. It's not like we're being overrun with Apple Watch teardowns after all.

Victor Szulc -

I wonder if you could get a job working for Apple - using this as your CV :)

Ultimate Xbmc - 返信

Amazing teardown!! I've been waiting for today just to see what it looks like inside.

ifix - 返信

You have to hand it to iFixit and their quirky pop culture annotations lol I bet Step# 24.1 is a reference to the Beastie Boys lol

Reggie - 返信

you mean they can't get those little watch batteries that last two decades on these things??? read our humourous review of Apple Watch here: http://entryrevel.com/2015/04/23/just-th...

EntryRevel - 返信

I hope you will do one for the 42mm would like to find out what size battery is in that one with the extra space and that apple says it does seem to get longer battery life, we don't know how much longer with the extra screen to power but look at the iPhone 6 and 6 plus.

Brianmcs - 返信

who made the gyroscope? is anything in watch made by INVN? thanks, nice job.

bizwhizyay - 返信

ST Micro made the gyroscope.

iamedriczhang -

Can you do a tear down of the Watch Edition version?

vandutran - 返信

OK... You know what CPU is inside of the S1?

I'll tell you...

Ready?

It's a single core version of the A5.... You heard it here first. How do I know?

Can't tell, but here's something to think about: Remember when a new version of the 3rd Gen Apple TV showed up, featuring a 28nm, reworked single core version of the A5?

And remember there was a lot of speculation, that it was a test run of sorts, and that Apple was planning to use the chip for something else? Since it didn't really make sense to go through all that trouble just to save a few watts in an Apple TV?

Victor Szulc - 返信

The Gyro is marked C451. How does anyone know that is STM?

KrisCo - 返信

The 6 axis Accel/Gyro in the Apple Watch is Labeled "C 451". How does this tie it to STM? STM uses their ST letter logo and doesn't have a part "C" anything. How is it that an analyst named Blair at Rosenblat announced STM as the Apple Watch design winner two weeks ago?

At some point the winner needs to brag. No one is taking credit yet...

KrisCo - 返信

I find it hard to believe there would be any upgrade path for this device. The case, screen and band are probably about $20 in material/assembly cost. While exquisitely designed, the case is $1.00 worth of metal. The full assembly and ASICs (and R&D and profit) is where the cost is.

-portable RF design engineer

mike - 返信

Can you unbox the case for the Stainless Steel? I want to see if it is possible to make a case like the apple watch edition.

georgelachow - 返信

I'm interested to see the tear down of the leather band.. I'd love to find a way to use a 3rd party band without resorting to a kickstarted band adapter.

Philip Temiyasathit - 返信

It's imposible to measure the relation between oxygenated hemoglobyn and reduced (not oxygenated) hemoglobyn (Hb) without the pair of ir and red lights, is necesary to have this two ligths and receptors for each one light to make a relation between both Hb (oxygenated and reduced) to get a porcentage like 95% of oxygen saturation ( 95% SpO2)

RSR1 - 返信

what do the connections between photodiode, the discrete texas instruments op-amp, and the S1 chip look like? Are there any other components in that signal chain?

tormaid - 返信

A more powerfull battery replacement will be needed in the future.

operarwitter - 返信

Please please please tear open the link bracelet components. The spring mechanisms in both the butterfly enclosure and the individual removable links are works of engineering too.

maximumtrevolocity - 返信

Taptec engine is having recall issues. Seems they are down to only one supplier as of news this morning.

steve - 返信

Can you remove the digital crown?

Alex Stan - 返信

Guys, any idea whether everything can be removed from the casing without destroying parts?

I'm really confused as to how the electroplating companies are managing to plate the casing without frying the board if they leave it in there or whether they even remove it before applying raw voltage to it.

lanhamchris88 - 返信

What language is the game created for this device written in?

Emily Wong - 返信

Anyone could tell the name of the optical sensor for hearth monitoring or some sensor similar?

edoardonagali - 返信

A Green LED and a photo sensor which is tuned to measure the reflection of the light is what’s used. The amount of reflection changes with your hearts pumping of the blood cells in your skin.

Dan -

Could you please share some more sturcture details about the tapic engine?

Kenny - 返信

The topic engine is nothing more than a weighted piston which is moved from one side to the other by a magnetic coil and returned by a spring, repeating the throw over and over again. The speed of the action sets off the vibration you feel.

Dan -

Hello, can you tell me what is the difficulty to separate the LCD screen of the touch glass? Can only do we replace the glass easily? Or the glass is glued to the LCD screen? Thank you and good day

flney - 返信

Hi. I need the same. Did you solve it? I find the spare parts: the external crystal and the glue (adhesive stick) but I have some doubts: How separate brocken cristal from usable lcd and how Stick the new crystal with lcd.

domenico sicignano -

The screen is less than a millimeter thick! You are just not going to be able to peel it away without damaging it.

Which is why we replace the entire display assembly Apple Watchのスクリーンの交換

Dan -

Can anyone tell me if buying a replacement screen from ebay (http://ebay.eu/1RvsqPT) and replacing it using this guide will destroy the waterproofing of the watch. If so, by how much, I'm not going swimming or anything but I wear it in the shower at the moment.

The scratch is very deep and noticeable so I'd really like to remove it :(

Leigh Ellis - 返信

Hi. I need the same. Did you solve it?

domenico sicignano -

Waterproofing is more than the parts its the skills of the person doing the work.

Even still even Apple won’t warranty a fixed watch to be waterproof after a repair. There are too many variables to be assured it will be as tight as it was from the factory.

Dan -

Awesome. Very Helpful!!

Jarby Agudelo - 返信

What is the voltage and amps on the wireless charging coil receiver and emitter? Is possible retrofit the receiver inside an iPhone?

fsantiago - 返信

Sorry just not possible!

Dan -

please help?

how i replace the display cable from the s1 board?????

avirambason - 返信

Sorry you can’t it’s part of the SIP package

Dan -

What's the black seal for that runs on the inner of the watch once the screen is removed. As mine came off when pulling off the screen it has two long bits that go near battery connection. How difficult would it be to replace/refit

Jody - 返信

Besides the adhesive there is the touch sensor that runs around the rim of the case which you can damage when taking off the display assembly.

Dan -

Where I can buy my new Iwatch 42mm battery ist generation in USA please ???????

mauroendara@me.com

regards

Mauro Endara - 返信

Review the iFixit guide here Apple Watchのバッテリーの交換 on how and a link to the needed battery.

Dan -

if i damaged the pop connectors trying to get the metal bracket off (nearly impossible) can i replace them? if my lcd was working despite shattered glass--how to separate the two?

Blake Omlie - 返信

Sounds like your watch lost the band button. Apple has been replacing them if they come off. But, you also need a new display assembly if the crystal is cracked. Review the iFixit guide Apple Watchのスクリーンの交換 on how to do it and a link to the needed part.

Dan -

It is possible to modify qi charger to work with apple watch?

Patrik Havlík - 返信

Sorry no, You would need to redesign the SIP module from the ground up!

Dan -

A thousand dollars question, will it be possible for an expert technician to take aluminum Apple Watch 7 internal components and implant them into my ceramic Apple Watch 5?

Matti - 返信

To many differences between the screen and the sensor plate.

Dan -

コメントを追加

統計データ:

過去 24時間: 32

過去 7 日: 215

過去 30 日: 982

今までの合計 949,072