メインコンテンツにスキップ

この分解は進行中です。 – 最新版を見るには定期的に再読み込みします。

必要な工具と部品

  1. (TC) PlayStation Teardown, (TC) PlayStation Teardown: 手順 1、 1の画像 1
    • Flip the unit upside down to access the six screws on the bottom.

    • Remove the six screws indicated with a Phillips-head screwdriver. All the screws are of the same length.

  2. (TC) PlayStation Teardown: 手順 2、 1の画像 1
    • Turn the unit back over, and pull the top half up and away from the device.

  3. (TC) PlayStation Teardown: 手順 3、 1の画像 1
    • Unplug the laser assembly's power cable and ribbon cable from the main board.

    • Remove the two screws on the memory card/controller port, disconnect the ribbon cable, and lift it out of the case.

  4. (TC) PlayStation Teardown: 手順 4、 2の画像 1 (TC) PlayStation Teardown: 手順 4、 2の画像 2
    • To remove the power supply, disconnect the cable and remove the two screws, then lift it out of the case.

  5. (TC) PlayStation Teardown: 手順 5、 2の画像 1 (TC) PlayStation Teardown: 手順 5、 2の画像 2
    • Remove the 3 screws from the shield.

  6. (TC) PlayStation Teardown: 手順 6、 2の画像 1 (TC) PlayStation Teardown: 手順 6、 2の画像 2
    • Remove the 5 Phillips screws.

    • You can now lift the main board out of the case.

  7. (TC) PlayStation Teardown: 手順 7、 2の画像 1 (TC) PlayStation Teardown: 手順 7、 2の画像 2
    • Lift the RF shield out of the case.

  8. (TC) PlayStation Teardown: 手順 8、 2の画像 1 (TC) PlayStation Teardown: 手順 8、 2の画像 2
    • Reinstall the RF shield by dropping it in and lining up the slots and tabs.

  9. (TC) PlayStation Teardown: 手順 9、 2の画像 1 (TC) PlayStation Teardown: 手順 9、 2の画像 2
    • Replace the main board. Only install the screws indicated in red.

  10. (TC) PlayStation Teardown: 手順 10、 1の画像 1
    • Replace the top shield, and secure with the 3 screws indicated.

    • Reinstall the memory card / controller module. Connect the ribbon cable and replace the 2 screws.

  11. (TC) PlayStation Teardown: 手順 11、 1の画像 1
    • Align the optical drive assembly with the three pegs.

    • Reconnect the power and data cables for the optical drive.

  12. (TC) PlayStation Teardown: 手順 12、 1の画像 1
    • Slide the cover on the system in the same way you took it off and replace the black screws indicated.

  13. (TC) PlayStation Teardown: 手順 13、 1の画像 1
    • Plug in the console and turn it on.

    • Thanks for looking at my teardown!

作成者

12人の作成者と共同で作成されました。

Nick

メンバー登録日: 11/10/09

88,431 ポイント

49のガイドは作成済み

チーム

Master Techs Master Techs人のメンバー

Community

322 メンバー

2,506のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 27

今までの合計 43,005