iPod nano (6th Gen) Display Assembly

  • iPod nano (6th Gen) Display Assembly
iPod nano (6th Gen) Display Assembly

$44.99

$44.99

ご希望の商品が再入荷しましたらお知らせします。

製品詳細

概要

概要

Replace a broken or damaged display assembly compatible with a sixth generation iPod nano.

This assembly includes the LCD and fused touch screen panel.

互換性

互換性

  • iPod nano (6th Gen) model A1366

仕様

仕様

Part #:
821-1134-A

互換性

修理にまつわるストーリー

ユーザのアバター

問題

I blew the screen out of a Ipod Nano 6 gen. I was going to throw it away then found the Ifixit repair article.

修理

It couldn't have been any easier. The ifixit article walked me through replacing the screen, and in all it took about 20 minutes.

アドバイス

Don't hesitate. Ifixit was a one-stop repair shop.

ユーザのアバター

問題

Broken front panel.

修理

It was very easy and did not take very long.

アドバイス

Don't drop your device.

ユーザのアバター

問題

The front panel screen was shattered and needed to be replaced

修理

Overall the repair went well.

Problem Found - The front panel is held in place by a thin coating of some type of adhesive (which the heat gun loosens up). In my case, since the screen was shattered and splintered. There were small shar . . .

ユーザのアバター

問題

The screen was completelly broken due a fall in the sidewalk of her iPod

修理

I bought the plastic tools, the replacement part (touch glass) for the iPod nano 6th generation. As all the parts arrived, we opened the guide and follow all the steps, the instructions were clear and, with fotos we didn´t have . . .

ユーザのアバター

問題

I left my nano in my watch pocket and it was washed. Not at good thing. Better ways to clean the screen....after the thorough cleaning, nano would sync up to computer but no screen display.

修理

putting in a new screen did not solve the problem but it was easy to swap out the screen

アドバイス

Don't forget your nan . . .

ユーザのアバター

問題

The Ipod was prviously dropped on a hard serface causing the screen to splinter.

修理

The total repair time too about 5 mins. Guides on Ifixit were very insightful and thorough. Hardest part was getting the miniture srews out of the EMI shield and getting the screen tucked in.

アドバイス

Watch the screws don't run aw . . .

ユーザのアバター

問題

The nano's screen was cracked after falling on pavement

修理

The directions were great. The two connectors are extremely tiny and required some trial and error for a solid fit.

アドバイス

Be gentle when aligning the two tiny connectors and make sure the final connection is good. Otherwise, the process is simple. Don' . . .

もっと表示する