iPhone 7 Parts
iPhone 7 Screen
Replace a scratched or cracked front glass panel or a malfunctioning display, front facing camera, or earpiece speaker on your iPhone.
iPhone 7 Replacement Battery
A new replacement 1960 mAh battery compatible with the iPhone 7. 3.8 Volts (V), 7.45 Watt Hours (Whr). This replacement does not require soldering and is compatible with ...
iPhone 6/6s/7 Battery Adhesive Strips
Use these custom adhesive strips to secure the battery of an iPhone 6, iPhone 6s, or iPhone 7 to the rear case.
iPhone 7 Display Assembly Adhesive
This custom cut adhesive film secures the front screen display assembly to the case of an iPhone 7.
SIM Card Eject Tool
Safely eject the SIM card from Apple GSM/LTE devices (iPhones and iPads) and other electronic devices.
Lightning to USB Charging Cable
Charge or sync lightning port equipped portable Apple devices
iPhone 7 Lightning Connector Assembly
Replace the lightning connector, two microphones, and flex cable.
Flexible LCD holder
iPhone 7 LCD and Digitizer
Replace a scratched or cracked front glass panel or malfunctioning display.
NuGlas Tempered Glass Screen Protector for iPhone 7/8
Protect your iPhone 7 or iPhone 8 screen!
iPhone 7 Bare Logic Board
This is only the board to which all the surface soldered components would be mounted. This part does not include any other components.
PlierTek Corner and Sidewall Repair Pliers
PlierTek Pliers are the easiest fastest way to fix bent iPhone and iPad corners and sidewalls.
iPhone 7 Rear Camera Lens Cover
Replace a scratched external lens cover for the rear-facing camera.
iPhone 7 Vibrator
Replace the or linear oscillating vibrator in your smartphone. Compatible with an iPhone 7.
iPhone 7 Rear Camera
Replace a malfunctioning 12 megapixel main camera.
iPhone 7 Front Camera and Sensor Cable
This cable assembly includes the front-facing camera and the proximity sensor.
iPhone 7 Earpiece Speaker
Replace a malfunctioning earpiece speaker with this part.
iPhone 7 Wi-Fi Diversity Antenna
Replace the Wi-Fi antenna and cable that is stuck to the loudspeaker in the lower right corner inside your smartphone.
iPhone 6s/6s Plus/7/7 Plus Bottom Screws
Replace the 2 screws in the bottom exterior of your phone. Compatible with an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.
iPhone 7 Top Left Antenna
Replace a missing or damaged antenna contact assembly in the top left of the rear case and fix cellular connectivity problems.
iPhone 7/7 Plus SIM Card Tray Gasket
Replace a torn or missing gasket on the SIM card tray for an iPhone 7 or iPhone 7 Plus.
iPhone 7 SIM Card Tray
Replace a bent or missing SIM card tray for an iPhone 7. This tray holds the nano SIM card and is inserted on the side of the phone.
iPhone 7 Lightning Port Gasket
Replace the adhesive backed foam gasket for the lightning port of an iPhone 7.
iPhone 7/7 Plus Bottom Screws
Replace the screws in the bottom exterior of an iPhone 7 or 7 Plus.
iPhone 7/7 Plus Test Cable for Front Camera and Sensors
This test cable simplifies connecting and testing front-facing camera and sensor cable assemblies for an iPhone 7 or iPhone 7 Plus.
iPhone 7/7 Plus Power and Volume Button Gaskets
Replace a torn or missing gasket on one of the power or volume button face posts for an iPhone 7 or iPhone 7 Plus. Set of six gaskets.
iPhone 7 Speaker and Microphone Mesh Set
Replace the mesh covers for the speaker, vent, and microphone openings.
iPhone 7 Lightning Port Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly in an iPhone 7. Set of 5 pads.
iPhone 7/7 Plus Power/Volume Button Retaining Clips
Replace the internal clips that hold the external button covers in place. Set of three.
iPhone 7 Loudspeaker Gaskets
Replace the adhesive backed foam gasket for the loudspeaker opening of an iPhone 7. Set of 5 gaskets.
iPhone 7 Flash Diffuser
Replace a scratched or missing camera flash diffuser lens.
iPhone 7 Rear Camera Foam Pads
Replace the adhesive backed foam pad between the rear-facing camera and the rear case of an iPhone 7. Set of 5 gaskets.
iPhone 7 LCD Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the LCD cable connector in an iPhone 7. Set of 5 pads.
The successor to the iPhone 6s, the iPhone 7 was formally announced by Apple on September 7, 2016. New features include a quad-core system-on-chip with improved system and graphics performance, an updated display, and a much applauded water resistance. Additional features include stereo speakers and upgraded cameras. The phone is lacking a headphone jack, but an adapter allows headphones to connect to the Lightning port.
There are four models of the iPhone 7. Model A1660 is available in China and the US. In the US it is available unlocked but subsidized with a 2 year contract with Verizon or Sprint, or contract free with various pricing plans. Model A1778 is available globally and in the US. In the US it is available unlocked but subsidized with a 2 year AT&T contract, or contract free for AT&T or T-Mobile. Model A1779 is available in Japan unlocked and contract-free. Model A1780 is available in China for the China Mobile network.