iPhone 7 A1780 Case Components
Grab a toolkit for your iPhone 7 A1780 model and fix your broken phone!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
iPhone 7 Rear Camera Lens Cover
Replace an external lens cover for the rear-facing camera compatible with the iPhone 7.
iPhone 7 Speaker and Microphone Mesh Set
Replace the mesh covers for the speaker, vent, and microphone openings.
iPhone 7/7 Plus Lightning Connector Grounding Spring Contact
Replace the spring contact that grounds the lightning connector assembly to the back of the home button bracket compatible with the iPhone 7 and iPhone 7 Plus.
iPhone 7/7 Plus Power/Volume Button Retaining Clips
Replace the internal clips that hold the external button covers in place. Set of three.
iPhone 7/7 Plus Home Button Bracket
Replace a missing or bent metal bracket securing the home button assembly to the display assembly in your smartphone.
iPhone 7 Earpiece Speaker Mesh
Replace the mesh that covers the earpiece speaker opening compatible with the iPhone 7 model #A1660, A1778, A1779, A1780.
iPhone 7 Front Camera and Sensor Holders
These plastic guides center the front-facing camera and the ambient light sensor over the openings in the front glass panel.
iPhone 7 Rear Camera Connector Bracket
Replace the metal bracket that secures the rear-facing camera connector to the logic board compatible with iPhone 7.
iPhone 7 OEM Rear Case
Replace a scratched or dented aluminum rear case.
iPhone 7 Upper Cable Bracket
This metal bracket secures the audio control and power button cable connector to the logic board.
Externally, the Apple iPhone 7 is very similar to its predecessor. Other than a smoother look and a change in antenna band placement, not much has changed. However internally this phone is full of aggressive breaks from convention. Everything inside the new iPhone’s casing is a statement about the future of this phone. The home button is no longer a physical button, but rather full of pressure sensors and haptic vibration motors that simulate the feel of a button. The new A10 Fusion processor blends two high power cores that rival laptop performance along with two low power cores that combine with a much larger capacity battery to extend lifetime by up to two hours. This generation of iPhone has also seen the headphone jack removed, and in its place, new stereo speakers.
Model A1780 iPhone 7 is available exclusively from China Mobile and does not support CDMA networks. It is compatible with FDD-LTE bands 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 18, 19, 20, 25, 26, 27, 28, 29, 30 as well as TD-LTE bands 38, 39, 40, and 41.
The most commonly needed repair for the iPhone 7 are cracked screens and dead battery replacements. iFixit has the best iPhone 7 screens and iPhone 7 batteries on the market, along with a complete catalog of various other iPhone 7 parts for the less common repairs.
All iPhone 7 repairs will require a Pentalobe P2 screwdriver and Tripoint screwdriver in addition to standard precision electronics tools. Any repair that removes the battery from the chassis will require replacement adhesive strips. New to iPhone repairs is the iPhone 7 display assembly adhesive, that will need to be purchased for any repair that removes the front screen. Since the iPhone 7 is water resistant, a new screen adhesive will be required in order to retain its resistance to water damage. All iFixit Fix Kits come with all tools and replacement adhesive needed to complete your desired repair.
Once all parts and tools have been acquired, head to iFixit’s iPhone 7 repair guides for step-by-step instructions on how to make the fix.
The iPhone 7 earned a 7 out of 10 in iFixit’s repairability assessment. Watch the Teardown Review for more: