iPad Pro 11" 2nd Gen (2020) Parts
Replacement parts for your 2nd gereration iPad Pro 11" 2020 model to fix your broken tablet!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Flexible LCD holder
iPad Pro 11" (2018/2020) Adhesive Strips
Replace the custom cut adhesive strips that secure the front panel to the case compatible with the 11 inch iPad Pro tablet 2018 and 2020 models A1964, A1979, A1980, A2013...
iPad Pro 11" (2018/2020) Display Cables
Replace the two flex cables that connect the display daughter board to the logic board of an 11" 2018 or 2020 model iPad Pro.
Apple added the second generation iPad Pro 11" to the iPad line in March 2020. This iPad Pro is compatible with the second-generation Apple Pencil, which charges on the side of the tablet. The iPad also works with the Magic Keyboard and USB-C devices like monitors, cameras, and external SSDs thanks to the USB-C charging port on the bottom of the device. The iPad comes with 128 GB to 1 TB of flash storage and 6 GB of memory, with both components being soldered to the motherboard.
The second-generation iPad Pro 11” shares the same design as its predecessor: sharp flat sides and a screen with rounded corners. The new model has a distinctive square raised area on the back of the device where the cameras are located. To identify your iPad Pro, look for the serial number on the back of the device below the words “iPad Pro” and use Apple’s serial number lookup to find the exact model.
The most common repairs for the 2nd generation 11 inch iPad Pro are replacing a cracked front glass screen or a dead battery. The iPad Pro 11" front glass panel is held to the aluminum case with strips of adhesive. Once the device is opened, this adhesive will need to be replaced.