iOpener

  • iOpener / Toolkit / New
  • iOpener / Tool Only / New
  • iOpener / Tool Only / New
  • 360°
360

iOpener

This product cannot be shipped to Mexico.

Este producto no puede enviarse a México.

$19.99

$19.99

ご希望の商品が再入荷しましたらお知らせします。

製品詳細

概要

概要

The iOpener is a tablet opening tool designed to apply heat directly and evenly to case components joined with adhesive. Once the adhesive is softened with heat applied by the iOpener, the adhesive can be sliced using the many tools included in the iOpener kit. This toolkit is designed specifically for the iPad, but works with all tablets, smartphones, or other electronics needing heat application in the disassembly process. The iOpener is heated in your microwave. It is reusable, non-toxic, and food safe.

iOpener Toolkit includes:

Note: this product cannot be shipped to Mexico.

Avoid overheating your iOpener, follow this handy microwave heating guide.

修理にまつわるストーリー

ユーザのアバター
ericzel08's Story Photo #1329847
ericzel08's Story Photo #1329848

問題

Phone was dropped. Screen cracked so bad there was no display.

修理

As good as most screen repairs can be expected to go.

アドバイス

Buy some adhesive tape. If I had some I would've completely removed the leftover junk and put new stuff on the screen.

ユーザのアバター

問題

I waited like 8 months for parts to come into stock. Poor inventory procurement!

修理

Series 2 - 42mm screen and digizer installed as expected.

アドバイス

Take your time. Use a small 1mm flat head screw driver to remove the extra 3M double sided tape from the aluminum sealing surface. Use acitone to remove the extra . . .

ユーザのアバター

問題

The housing on my Switch had become warped, in ordered a replacement housing and decided to throw some custom colors on my Joy-Cons while I was at it.

修理

Fairly easy, the hardest part was making sure not to tear the digitizer flex and making sure all the meshes small parts were transferred from the old . . .

ユーザのアバター

問題

Went well. He did all the work and I just held the laptop and scroll down the instructions. He is 14 y.o. and has done multiple screen replacements and battery replacements.

修理

See above.

アドバイス

Perfect Father & Son bonding experience.

ユーザのアバター

問題

Lithium battery needed to be replaced

修理

Your instructions were spot on and the repair was perfect.

アドバイス

Patience and heat to loosen the adhesive.

ユーザのアバター

問題

My wife dropped it several times creating multiple cracks on the screen.

修理

The repair went well. I took my time and followed all the steps in the repair guide faithfully. I was even able to unsolder the small wake/sleep sensor from the broken screen and microsolder it back onto the new replacement scre . . .

ユーザのアバター

問題

My pixel XL's USB-C port would smoke when the cable was connected and the plastic portion of the connection was visibly melted.

修理

I was successful in changing the battery charging circuit/daughter board but I accidentally sliced the digitizer traces on the ribbon cable for the OLED panel while removing . . .

ユーザのアバター

問題

My phone is long since out of warranty or support. The battery had gotten to a point where I needed to charge as I used for traffic app, etc. I watched the videos and decided it was well within my capabilities to change battery. Worst case scenario would be that I irretrievably broke something and . . .

ユーザのアバター

問題

After well over 2 years in service, my factory battery was completely incapable of powering the phone for more than a few minutes with the screen off. Turning the screen on meant a nearly instant shutdown.

修理

The repair went incredibly well. Despite this being a particularly difficult phone to open, i . . .

ユーザのアバター

問題

The battery was losing charge rapidly, and seemed to be showing its age. The Pixels that have come out since did not appear to be compelling upgrades. So, I figured replacing the battery made the most sense.

修理

The outcome was positive. Opening the phone requires getting past a lot of epoxy. I marred on . . .

もっと表示する

この商品を購入された方は次の商品も購入されています。