Prying and Opening Tool Assortment

  • Prying and Opening Tool Assortment
Prying and Opening Tool Assortment

$9.99

$9.99

ご希望の商品が再入荷しましたらお知らせします。

Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

当社のショップを閲覧する

製品詳細

概要

概要

This tool assortment includes the most sought after Picks, Spudgers, Prying Tools, and more for electronics opening and component manipulation.

Includes:

修理にまつわるストーリー

ユーザのアバター
John Fitzgerald's Story Photo #1310284

問題

The back button on my phone was operating as if it was being pressed randomly.

修理

I've replaced the camera before (thanks to Ifixit), so the disassembly went smoothly.

アドバイス

Because it isn't specifically in the guide, there are a couple of small pieces (I think a speaker cover and the vibrator (for lack of a . . .

ユーザのアバター

問題

The microphone had stopped working on my wife's first gen Pixel phone and warranty had lapsed about a month before.

修理

Repair went pretty smoothly. Don't have a microwave so couldn't use the iOpener gel tube that came with repair kit (tried putting it in hot water but didn't really work) so used hair dr . . .

ユーザのアバター

問題

My battery was at times barely lasting for half the day. It would randomly shut down even while displaying a reasonable amount of power remaining. Processor slowdown is real and painful.

修理

Removing the adhesive on the battery was the most difficult part. The tabs ripped as soon as I tugged on them, . . .

ユーザのアバター

問題

My phone still works great, but the battery was so old that it just wouldn't hold a decent charge anymore. The phone was not designed for the battery to be user-replaceable.

修理

IFixIt assured me of how to go about it. I researched online and finally found a reputable replacement battery supplier, and I . . .

ユーザのアバター

問題

Extend the life and keep these material out of landfill or contamination of other natons..

修理

Perfect.

アドバイス

Not too hard, go for it!

ユーザのアバター

問題

My friend dropped my op1 and the red encoder hit the edge of the table. After the fall the red encoder only worked when holding pressure to the right and then spinning the encoder. Otherwise it would not register when turning it normally. I thought it just might be a mechanical issue but was not sur . . .

もっと表示する