キャンセル
この製品はお住まいの国ではお買い求めできません。
$49.99
iFixit Pro の割引が適用されました。登録番号:
$49.99
A-在庫の中古パーツは良好な状態です。
B-在庫のパーツは表面上の磨耗が多少あります。
C-在庫のパーツは表面上の磨耗がありますが、機能上問題はありません。
$49.99
iFixit Pro の割引が適用されました。登録番号:
$49.99
在庫切れ
発送準備をする
在庫切れ
発送準備をする
在庫数が少なくなっています。
製品詳細
修理にまつわるストーリー
this is the second fan I put in this machine. I hope this one lasts longer. Maybe someone has additional hints on making these things last?
Everything came off and went back together as it should have
There was no instructions on how to unplug the old fan. Pull up? Pull to the side? I put a drop of oil on the old fan and got another week out of it before it started screaming again. Enough time for the new fan to arrive.
this is the second fan I put in this machine. I hope this one lasts longer. Maybe someone has additional hints on making these things last?
Everything came off and went back together as it should have
There was no instructions on how to unplug the old fan. Pull up? Pull to the side? I put a drop of oi . . .
My left hand side cooling fan of my trusty 17" MacBook Pro was getting really noisy. So loud that the kids in my noisy Grade 3 class asked me what was that strange noise when I was marking the attendance roll one morning
Everything went really smoothly...no left over fasteners at the end. Always a good sign :-)
Follow the instructions closely and put your fasteners in order. Use a piece of tape turned up side down to hold the little devils in place.
My left hand side cooling fan of my trusty 17" MacBook Pro was getting really noisy. So loud that the kids in my noisy Grade 3 class asked me what was that strange noise when I was marking the attendance roll one morning
Everything went really smoothly...no left over fasteners at the end. Always a go . . .
The fan was failing, making a buzzing noise.
The repair went pretty well. The iFixit guide was very helpful. The only difficulty was figuring out how to remove the fan plug connection. The connection lifts up rather than pulls apart. This wasn't very clear in the guide.
The trick was figuring out how to separate wire plug connections. The rest was pretty straight forward. It is wise to make some notes as you go regarding wire color connection order and to have some tape or something to stick the screws to in the order you took them out. Not too hard even if you don't.
The fan was failing, making a buzzing noise.
The repair went pretty well. The iFixit guide was very helpful. The only difficulty was figuring out how to remove the fan plug connection. The connection lifts up rather than pulls apart. This wasn't very clear in the guide.
The trick was figuring out . . .
Noise
Very well, only problem was it was a little unclear in step 17, how to disconnect the isight,inverter, and left fan cables. Once I got them to pop off, the rest was easy and it fixed my problem. Took about an hour and a half.
Make step 17 a little clearer to us novices. Too late for pictures, sorry.
Noise
Very well, only problem was it was a little unclear in step 17, how to disconnect the isight,inverter, and left fan cables. Once I got them to pop off, the rest was easy and it fixed my problem. Took about an hour and a half.
Make step 17 a little clearer to us novices. Too late for pictures, . . .
The right fan was replaced a year or so ago on this 7 year old mbp ---- so the left fan went crazy!
the only problem was that the fan connector was different than the picture. The picture shows a white connector with "wings" that are used to slide back and out. The actual fan connector is black and does NOT slide in. It rather pushes straight down into the connector receptacle. That took 15 minutes of being very careful not to get frustrated and force something. All is ok and the new fan is purring : )
Yes, a specific picture of the A1212 fan connection and description of how it comes out and goes back in.
The right fan was replaced a year or so ago on this 7 year old mbp ---- so the left fan went crazy!
the only problem was that the fan connector was different than the picture. The picture shows a white connector with "wings" that are used to slide back and out. The actual fan connector is black and . . .
The left fan had been making noise over a period of months. Recently, the fan became very noisy any time the computer was running. I believe the bearings had failed in the fan.
The repair went smoothly. The directions given in the guide were excellent and made the repair easy. I took about an hour to complete the repair.
While the case is open, take the opportunity to blow the dust out. I should have purchase the #00 phillips screwdriver. I found something that worked, but the right tool would have made the job easier.
The left fan had been making noise over a period of months. Recently, the fan became very noisy any time the computer was running. I believe the bearings had failed in the fan.
The repair went smoothly. The directions given in the guide were excellent and made the repair easy. I took about an hour to . . .
The left fan thought it was a jet engine.
I had some doubts in the beginning but then the whole procedure seemed to be natural.
The photos on your site worked out to be a good guide.
I was so absorbed, that I forgot to take any pics.
It´s a good idea to put the screws on a piece of cellar tape and tag them. It makes it easier to put everything together again.
You just need to be bold enough to start.
The left fan thought it was a jet engine.
I had some doubts in the beginning but then the whole procedure seemed to be natural.
The photos on your site worked out to be a good guide.
I was so absorbed, that I forgot to take any pics.
It´s a good idea to put the screws on a piece of cellar tape . . .
もっと表示する
表示を隠す
この商品を購入された方は次の商品も購入されています。
