MacBook Pro 13" Unibody Early 2011 Consumables
カテゴリーを選ぶ
- すべて
- Accessories
- Adapters
- Batteries
- Cables
- Case Components
- その他消耗品
- Display Components
- Fans
- Hard Drive Brackets
- Hard Drive Enclosures
- Hard Drives
- Hard Drives (SATA)
- Heat Sinks
- Keyboards
- LCDs
- Logic Boards
- MagSafe Boards
- Memory Maxxer Kits
- Microphones
- Optical Drives
- RAM
- Rubber Feet
- Screws
- Speakers
- SSD Upgrade Kits
- SSDs
- Trackpads
- Wireless
MacBook Pro 13" Unibody Early 2011で使用されているパーツ：
Arctic Silver Thermal Paste
Forms a continuous, heat conductive layer between a processor and its heat sink. A new layer of thermal paste keeps your processor from overheating. 3.5 grams
Arctic Silver ArctiClean
Two part cleaner dissolves old thermal paste on heat sinks and processors. One 30 ml bottle of thermal material remover and one 30 ml bottle of thermal surface purifier.
デバイスの情報
In February 2011, Apple refreshed the 13" MacBook Pro line by changing to the Intel HD Graphics 3000, increasing VRAM to 384 MB, and upgrading to Core i5 and Core i7 processors with PC3-10600 RAM. The Mini DisplayPort was also replaced (but still backwards compatible) with the new Thunderbolt standard allowing 10 Gbps transfer speeds in both directions.
The most common repairs with the MacBook Pro 13" Unibody for Early 2011 are replacing a dead battery or upgrading the hard drive or RAM. The MacBook Pro 13" Unibody (Early 2011) Memory Maxxer RAM Upgrade Kit includes all the parts and tools you need to upgrade to 16 GB of RAM.
The MacBook Pro 13" Unibody for Early 2011 requires a Tri-point Y0 Screwdriver to remove the battery. The battery kit includes all the needed tools.
Once you've bought your parts and tools, check out iFixit's MacBook Pro 13" Unibody for Early 2011 repair guides for step-by-step instructions on how to make the fix.