メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Carefully slide the LCD out of its holder until the connector, highlighted in blue, is visible. Open the clip on the connector by pulling it with your fingernail to the right of the screen. Remove the damaged LCD and insert the replacement. After clipping the connector again, reassemble the camera using the six (6) previously removed screws.
  • Carefully slide the LCD out of its holder until the connector, highlighted in blue, is visible. Open the clip on the connector by pulling it with your fingernail to the right of the screen.

  • Remove the damaged LCD and insert the replacement.

  • After clipping the connector again, reassemble the camera using the six (6) previously removed screws.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります