メインコンテンツにスキップ
英語
日本語

手順 7を翻訳中

手順7
Place the radio with the front facing down and the top of the radio facing you. Remove the seven 6 mm screws holding the cross member in place. The screw called out in yellow is slightly different than the other screws. The length is the same but it has a tighter thread pitch. Make sure it goes back in the same place.
Cross Member
  • Place the radio with the front facing down and the top of the radio facing you.

  • Remove the seven 6 mm screws holding the cross member in place.

  • The screw called out in yellow is slightly different than the other screws. The length is the same but it has a tighter thread pitch. Make sure it goes back in the same place.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります