メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
日本語

手順 7を翻訳中

手順7
Continue cutting through the adhesive on the top and right sides of the phone. The proximity sensor, earpiece speaker, and front-facing camera are all located along the top edge of the phone, but are housed beneath the display unit. You shouldn't come into contact with any of them as you insert your pick to cut the adhesive. The proximity sensor, earpiece speaker, and front-facing camera are all located along the top edge of the phone, but are housed beneath the display unit. You shouldn't come into contact with any of them as you insert your pick to cut the adhesive.
  • Continue cutting through the adhesive on the top and right sides of the phone.

  • The proximity sensor, earpiece speaker, and front-facing camera are all located along the top edge of the phone, but are housed beneath the display unit. You shouldn't come into contact with any of them as you insert your pick to cut the adhesive.

続けて、デバイスの上部と右側の接着剤を切開します。

近接センサ、イヤホンスピーカー、フロントカメラは全て、デバイスの上端に沿って搭載されていますが、ディスプレイユニット下に付けられています。 開口ピックを挿入して接着剤を切開する際に、それらのコンポーネントに接触しないでください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります