メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
Use the tip of a spudger to peel back the cloth tape covering the headphone jack and the I/O assembly cable. There is no need to completely remove the tape. Just peel it back enough so that the tape is only adhering to the ribbon cable and not the metal frame.
  • Use the tip of a spudger to peel back the cloth tape covering the headphone jack and the I/O assembly cable.

  • There is no need to completely remove the tape. Just peel it back enough so that the tape is only adhering to the ribbon cable and not the metal frame.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります