メインコンテンツにスキップ

注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。

英語
日本語

手順 8を翻訳中

手順8
The non-battery-edge contains a wider swath of adhesive than the other sides. Insert the opening pick as deep as you can to cut through all of it. If cutting is difficult, apply more heat as needed. Leave the pick in place to prevent the adhesive from resealing, and grab another pick as you proceed to the next step.
  • The non-battery-edge contains a wider swath of adhesive than the other sides. Insert the opening pick as deep as you can to cut through all of it.

  • If cutting is difficult, apply more heat as needed.

  • Leave the pick in place to prevent the adhesive from resealing, and grab another pick as you proceed to the next step.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります