注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。
手順 10を翻訳中
-
Use tweezers to peel away any remaining adhesive from both the rear panel and the phone's chassis.
-
Clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.
-
Peel away the replacement adhesive's liner, align it with the back of the phone, and press it into place.
-
Remove any remaining liners, and replace the rear glass panel.
-
After installing the rear panel, apply strong, steady pressure to your phone for several minutes to help the adhesive form a good bond, such as by placing it under a stack of heavy books.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。