メインコンテンツにスキップ
英語
日本語

手順 12を翻訳中

手順12
This shows the bottom rail and its orientation to the housing. Remove the cellophane that covers the batery connectors as well as part of the logic board. Do not discard the cellophane, it will have to be replaced during the reassembly.
  • This shows the bottom rail and its orientation to the housing.

  • Remove the cellophane that covers the batery connectors as well as part of the logic board.

  • Do not discard the cellophane, it will have to be replaced during the reassembly.

  • Loosen the cellophane that comes from the battery to the logic board. It can not be removed completely, but must be lifted off of the logic board.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります