メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
Remove the two Allen screws from the bottom. Another view of the two Allen screws on the top part. With the four screws removed, gently lift the non-connector side of the hard drive. It will only need to come up by about 1/4 of an inch.
  • Remove the two Allen screws from the bottom.

  • Another view of the two Allen screws on the top part.

  • With the four screws removed, gently lift the non-connector side of the hard drive. It will only need to come up by about 1/4 of an inch.

  • DO NOT lift it to high on that side, it may bend the pins on the connector.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります