注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。
手順 3を翻訳中
手順3

-
Pry up the metal shield covering the smaller ribbon cable port using the plastic opening tool.
-
Disconnect the smaller ribbon cable by prying up with the nylon spudger.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。