メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Beware, as the Touch will be very hot. It may be helpful to hold it with a towel while prying. Insert the edge of an iPod opening tool between the front glass panel and the black plastic bezel near the home button.
  • Beware, as the Touch will be very hot. It may be helpful to hold it with a towel while prying.

  • Insert the edge of an iPod opening tool between the front glass panel and the black plastic bezel near the home button.

  • Do not try to pry between the black plastic bezel and the steel rear case.

  • Pry the bottom edge of the front panel upward, being careful not to bend the glass excessively.

  • If it is too difficult to pry up the front panel assembly, reheat it and try again.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります