メインコンテンツにスキップ
英語
日本語

手順 5を翻訳中

手順5
Being careful not to rip any ribbon cables still connecting the two halves of the device, lay the device out so that you can access the back side of the display assembly. Insert a plastic opening tool under the rubber holding the home button in place. Slide the tool around the perimeter of the button, prying up as you go.
  • Being careful not to rip any ribbon cables still connecting the two halves of the device, lay the device out so that you can access the back side of the display assembly.

  • Insert a plastic opening tool under the rubber holding the home button in place.

  • Slide the tool around the perimeter of the button, prying up as you go.

  • Lift the home button out of the device.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります