メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
LCD holder removed from logic board disconnect the ribbon cable from the logic board. This one requires to move the brown tabs on the left and right hands side in an upward direction. They should just slide up by about an 1/8th of an inch. this will free the ribbon cable. With the ribbon cable disconnected, remove the front case.
  • LCD holder removed from logic board

  • disconnect the ribbon cable from the logic board. This one requires to move the brown tabs on the left and right hands side in an upward direction. They should just slide up by about an 1/8th of an inch. this will free the ribbon cable.

  • With the ribbon cable disconnected, remove the front case.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります