メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
With the case split, you can see the LCD in its holder. The LCD is simply laid into the holder. Gently remove the LCD from the holder and just flip it to the side. Do not remove it yet. You will have to loosen the clip on the connector. Use your fingernails to move it in the opposite direction from the LCD, this will open it up. Remove the four screws from the LCD holder.
  • With the case split, you can see the LCD in its holder. The LCD is simply laid into the holder.

  • Gently remove the LCD from the holder and just flip it to the side. Do not remove it yet. You will have to loosen the clip on the connector. Use your fingernails to move it in the opposite direction from the LCD, this will open it up.

  • Remove the four screws from the LCD holder.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります