メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての33個のガイドに反映されます。

英語
ドイツ語

手順 2を翻訳中

手順2
Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board. On some models, also removing the silver 3.5 mm T5 Torx screw from the heatsink can aid in I/O board removal. Carefully lift the I/O board and remove it from the lower case.
  • Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board.

  • On some models, also removing the silver 3.5 mm T5 Torx screw from the heatsink can aid in I/O board removal.

  • Carefully lift the I/O board and remove it from the lower case.

Entferne die beiden 3,1 mm T5 Torx-Schrauben, mit denen das I/O Board am Logic Board befestigt ist.

Hebe das I/O Board vorsichtig an und entferne es aus dem unteren Gehäuse.

[* red] Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board.
+ [* orange] On some models, also removing the silver 3.5 mm T5 Torx screw from the heatsink can aid in I/O board removal.
[* black] Carefully lift the I/O board and remove it from the lower case.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります