メインコンテンツにスキップ
英語
スペイン語

手順 3を翻訳中

手順3
This glue-ridden heat-pry-and-slice opening procedure is certainly not our favorite, but at least by now it's getting familiar. As usual, it all starts with our trusty iOpener. Cracking open the phone, we spy a delicate fingerprint sensor cable. This makes carving through all that glue a bit treacherous as the cable might be easy to slice right through if you aren't expecting it. Cracking open the phone, we spy a delicate fingerprint sensor cable. This makes carving through all that glue a bit treacherous as the cable might be easy to slice right through if you aren't expecting it.
  • This glue-ridden heat-pry-and-slice opening procedure is certainly not our favorite, but at least by now it's getting familiar. As usual, it all starts with our trusty iOpener.

  • Cracking open the phone, we spy a delicate fingerprint sensor cable. This makes carving through all that glue a bit treacherous as the cable might be easy to slice right through if you aren't expecting it.

Este procedimiento de apertura de apalancar y calentar no es nuestro favorito, pero al menos ahora se está haciendo conocido. Como de costumbre, todo comienza con nuestro confiable iOpener.

Al abrir el teléfono, observamos el delicado cable del sensor de huellas digitales. Esto hace que cortar a través de todo ese pegamento sea amargo, ya que el cable podría ser fácil de cortar si no lo estás esperando.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります