メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

英語
日本語

手順 6を翻訳中

手順6
Remove four more screws. The bottom left screw will release the audio board support. Peel back the lenses at a 45° angle from the bottom up. You'll then see two yellow strips held with black protective tape. Peel back the tape with tweezers.
Separate the lenses from the PCB
  • Remove four more screws. The bottom left screw will release the audio board support.

  • Peel back the lenses at a 45° angle from the bottom up.

  • You'll then see two yellow strips held with black protective tape. Peel back the tape with tweezers.

  • Also with tweezers, remove the yellow tape over the connection between the PCB and the lenses.

  • The lenses appear to be fresnel on the inside but smooth on the outside.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります