メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
Remove the screw on the bottom of the battery compartment. Keep this screw with the one removed on the previous step. These two screws have a different length than all the other screws. They are the shortest ones in the camera With those two screws removed, you can not separate the back part of the case. Flip the LCD to the right and out of the frame. Do NOT try to remove it yet.
  • Remove the screw on the bottom of the battery compartment. Keep this screw with the one removed on the previous step. These two screws have a different length than all the other screws. They are the shortest ones in the camera

  • With those two screws removed, you can not separate the back part of the case.

  • Flip the LCD to the right and out of the frame. Do NOT try to remove it yet.

  • Remove the screw screws that hold the LCD frame to the logic board. Keep the 3 screws separated from the rest of the screws, due to different length.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります