メインコンテンツにスキップ
英語
日本語

手順 5を翻訳中

手順5
This particular camera has some Kapton tape holding the cable to the logic board. Gently remove it from the board only. Open the locking tab on the PCB connector and remove the cable. This will separate the LCD from the board.
  • This particular camera has some Kapton tape holding the cable to the logic board. Gently remove it from the board only.

  • Open the locking tab on the PCB connector and remove the cable. This will separate the LCD from the board.

  • This is what the logic board looks like without the frame and the LCD.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります