手順番号4–iMac G5 17" Model A1144 Front Bezel Replacementを翻訳 - iFixit

Fix Your Stuff

Right to Repair

Parts & Tools

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての18個のガイドに反映されます。

ガイドに戻る

英語

日本語

前の手順次の手順

手順 4を翻訳中

手順4

Re-orient your iMac so it sits upright on the stand.

Insert a plastic card up into the corner of the air vent slot at the top of the rear case.

Push the card toward the top of the iMac to release the front bezel latch.

Re-orient your iMac so it sits upright on the stand.
Insert a plastic card up into the corner of the air vent slot at the top of the rear case.
Push the card toward the top of the iMac to release the front bezel latch.
Pull the front bezel away from the rear case.
Repeat this process for the other side of the front bezel.
It may be necessary to apply several layers of duct tape to the top of the access card to aid in releasing the latches.
If the bezel refuses to release, try pressing the lower edge back onto the rear case and repeat this opening process.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。