メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 17を翻訳中

手順17
Check the kickstart and gear change bushings, replace as necessary. Fit a new gear change o-ring seal into the outer case. Check the main gearchange spring is in good order. The earlier type is prone to cracking and failure. The later "cross over" type of spring shown in the picture fixes these issues.
Replace gearchange seal and springs
  • Check the kickstart and gear change bushings, replace as necessary.

  • Fit a new gear change o-ring seal into the outer case.

  • Check the main gearchange spring is in good order. The earlier type is prone to cracking and failure. The later "cross over" type of spring shown in the picture fixes these issues.

  • Now fit the cup washer and pawl spring as shown. This can be tricky to get right!

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります