メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 2を翻訳中

手順2
Undo the six screws holding the gearbox together. An impact screwdriver will make this task much easier. With a normal screwdriver, the screw heads are likely to strip, meaning you will need to drill them out. Lift off the gearbox end cover.
Separate the gearbox halves
  • Undo the six screws holding the gearbox together.

  • An impact screwdriver will make this task much easier. With a normal screwdriver, the screw heads are likely to strip, meaning you will need to drill them out.

  • Lift off the gearbox end cover.

  • Lift out the gearbox centre web complete with the gear cluster.

  • Retrieve the two selector forks from the gear cluster (otherwise they'll fall off).

  • Retrieve the detent plunger and spring from the main casing (otherwise it will fall out later).

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります