Skip to main content

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 2を翻訳中

手順2
The speaker and the antenna are both connected on the same black piece. Use a plastic opening tool to pop off the edges of the speaker/antenna piece from the motherboard. Turn over the motherboard and carefully lift the speaker/antenna piece straight up.
  • The speaker and the antenna are both connected on the same black piece.

  • Use a plastic opening tool to pop off the edges of the speaker/antenna piece from the motherboard.

  • Turn over the motherboard and carefully lift the speaker/antenna piece straight up.

  • The camera is held in the middle of the speaker/antenna piece. Make sure to lift directly up when lifting the speaker/antenna piece, otherwise you can risk damaging the camera.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります